Apple TV Siri Remote Keeps Disconnecting
As previously mentioned, there are a variety of different Apple remotes that come with your Apple TV. You may have either the aluminum, white, Apple TV remote, or Siri remote control, which all function about the same, with the exception of a few other advancements that come with the Siri remote. The Siri remote is able to be voice controlled, which makes the user experience even more hands-free, but what do you do if this remote keeps disconnecting?
If your Apple TV Siri remote keeps disconnecting, press the menu or Apple TV App/Home button on your remote to see if your Apple TV is asleep. If the TV is asleep, this can cause the remote control to momentarily disconnect in order to reserve power. However, if you notice that your TV is not asleep and your remote is still disconnecting on its own, you may need to pair your remote to your TV again.
To pair your Siri remote to your Apple TV, begin by pointing your remote three inches away from the TV. You will then press and hold the remotes Menu and Volume Up buttons for 5 seconds simultaneously. This may complete the pairing process for some, but for others, they will be prompted to place the remote on top of their TV so that the pairing process can be completed.
How To Charge Apple TV Remote
There are two types of Apple TV remotes. The Siri Remote can be charged while the Apple Remote needs a battery change. A Siri Remote comes with Apple TV 4K and Apple TV HD, and it can be charged.
You can use a lightning cable from your other Apple devices as an Apple TV remote charger. Connect one end of the lightning cable to the lightning port located at the bottom of the Siri Remote and the other to a computer USB port or a USB power adapter. It should take around three hours to charge your Siri Remote fully.
How Do I Program My Comcast Remote To My Toshiba TV
If it has a Setup button:
Also Check: How To Cast Hbo Max To TV
How To Connect Your Apple TV To Wi
Losing your remote is something that happens more often than we care to admit. When it happens to an Apple TV however, this becomes more troublesome as all of its features are tied to it. There are solutions to this problem though, and in this article, well show you how to connect the Apple TV to Wi-Fi without the remote.
How Do I Unpair My Apple TV From A Remote
You can use any Apple Remote to unpair Apple TV from a remote. If you lose the Apple Remote that you paired with Apple TV, a replacement remote wont work until you unpair Apple TV from the lost remote. If your Apple TV status light blinks 3 times in quick succession when you press keys on the remote but fails to respond on-screen, try these steps to unpair your remote:
- On an aluminum Apple Remote, press and hold the Menu and Left buttons for 6 seconds.
- On an earlier, white Apple Remote, press and hold the Menu and Previous/Rewind buttons for 6 seconds.
You can also use these steps:
When youve successfully unpaired a remote, Apple TV displays a broken chainlink symbol above an icon of a remote. You can now pair Apple TV with a different remote.
Reference: http://support.apple.com/kb/HT1555
Read Also: Watching Spectrum Online
Not Enough Storage Space
If you’ve installed a lot of applications or games on your Apple TV, storage space might get tight over time. The obvious solution is to remove unused apps and games. However, if you choose to do this from the home screen, it will take four steps to remove each app:
- Highlight the application you want to remove and long press on the trackpad until the icons begin to wiggle.
- Press the Play/Pause button.
- Select Delete.
- Click Delete once more to confirm.
If you’re removing multiple apps, this could take quite a while. A faster way to remove apps that also shows how much precious storage space is being used by each app is to go to Settings > General > Manage Storage. Applications will be sorted in descending order by file size. Just click the trash can icon to the right of an app and click Delete to remove each app.
How To Pair An Apple Remote With An Apple TV
The Apple TV is easily one of the most versatile media-streaming boxes you can buy. You can stream your favorite content, mirror a FaceTime call, play games, and more without tethering a phone, tablet, or PC to your TV. Its like an iPhone interface for your TV, actually only you need that pesky bundled remote to work correctly.
Apple set out to make its remotes easy to use, but you may still run into issues. Thankfully, this guide will show you how to pair an Apple remote with an Apple TV, as well as how to use alternatives to the bundled device.
Read Also: How To Get Cbs All Access On Lg Smart TV
Using The Apple TV Remote
For white and aluminum remote :
Press and hold the Menu and Left buttons for six seconds.
For black/Siri remote:
Were sorry, but this remote cannot be unpaired.
However, you can run through the steps of pairing to reset it. Thats all about on how to pair and unpair Apple TV Remote.
If you have any questions, feel free to drop a comment in the comments section below. Also, share with article with your friends and family, this may answer their questions about their Apple TV.
More Related Articles:
Types Of Apple TV Remotes:
There are two types of Apple TV Remotes:
Recommended Reading: Can I Get Discovery Plus On My Smart TV
Use A Bluetooth Keyboard
You can control Apple TV from a Bluetooth keyboard .
Pairing of the keyboard to your Apple TV is the same as what youd do to pair a Bluetooth accessory with your Mac or iPad.
To unpair the keyboard just go to Bluetooth menu on your Apple TV and press Forget on the device name.
Control Apple TV From Your Mac
If you do have Mac you can connect to Apple TV without native remote at all. The only things you need are USB-C or Micro-USB cable that supports data transfer, high-speed Internet connection and little bit patience. Here is what you should do:
/Screenshot from the Apple TV summary page in iTunes/
- CiderTV for OSX
- Ezzi Keyboard
- 1Keyboard
- Type2Phone
Lets say you have 3rd or 4th gen Apple TVs and a Macbook Pro. And you just want to be able to navigate the Apple TV menus from your Mac and do things like launch Netflix. Extended version of CiderTV for Mac with built-in keyboard will be available only for $3.99 from Mac Apple Store in nearest 2 weeks).
/Screenshot from CiderTV for Mac /
Also Check: How To Stream Oculus Quest To TV Without Chromecast
Apple TV Remote Keeps Disconnecting And Reconnecting
Apple TV remotes may be small, but they are mighty, which leads to the necessity of their operation so that your TV can be used without any type of restrictions. When your remote control is working fine one day, but then all of the sudden is disconnecting and reconnecting on its own on another, you are not only put in a position of having to navigate a faulty remote, but also having to uncover the cause of this problem.
If your Apple TV remote keeps disconnecting and reconnecting it could be that the batteries within your Apple TV remote have gone bad or died. The batteries within your remote are not the average battery, so you will need to replace each model with the specific battery designed for that device, as there are various remotes. Note, if you have a Siri Remote, the battery cannot be replaced but should be recharged.
For those of you that have an Apple TV remote that is aluminum, find the battery compartment on the back of the remote and use a coin to turn and open it. You will then remove the old battery and replace it with a new CR2032 or BR2032 lithium 3V coin battery. For those with a white Apple Remote, find the battery compartment on the bottom of the remote, press the circular release button with a paperclip, and slide the battery tray out.
Once you have the battery tray out of your white Apple TV remote, you will then remove the old battery and replace it with a CR2032 coin battery.
How To Use Your iPhone Or iPad As A Remote For Your Apple TV
First, make sure that you are using the same Wi-Fi network and you have the Home Sharing set up. Then follow these steps.
Recommended Reading: How To Screen Mirror Without Apple TV
Pair The Siri Remote With Apple TV
Turn on Apple TV and position the Siri Remote so its within 3 to 4 inches and pointing at the front of Apple TV.
Do one of the following:
Siri Remote : Press and hold the Back button and the Volume Up button for 2 seconds.
Siri Remote : Press and hold the button and the Volume Up button for 2 seconds.
Reset Apple TV Remote
If you are done with the above checks and still your Apple TV remote does not work, then you can reset Apple TV remote. Follow the given below steps.
Step 1: On your Apple TV remote, hold down the Menu and Volume Up button.
Step 2: Long press the buttons for almost 23 seconds.
Step 3: That’s it. You have reset your remote. It is ready for pairing with any Apple TV. This method is same for Siri remote as well as aluminum or white remote.
Don’t Miss: Charter Spectrum Watch TV
Have Issues With Your Siri Remote
Some users complained about the navigation speed on the new Siri Remote. And yes, you can not change the sensitivity. However, If the trackpad is too sensitive for you, you can adjust the scrolling speed. By default, it is set to Medium. To change it, go to Settings, openRemotesandDevices and chooseTouchSurfaceTracking. There you can select Slow, Medium, or Fast. This may also help you solve your struggle with inputting characters using the onscreen keypad.
Useful Tip: If you want to swipe straight to the end of the alphabet quickly, just swipe with a harder press on your Apple Remote touchpad. The cursor will fly across the display in either direction. This is really handy for selecting characters on the onscreen keyboard.
If none of the previous methods helped you to fix your unresponsive Apple Remote, you might want to make up an appointment at Apples Genius Bar. Let them examine your remote and let you know what the problem is. In the meantime, you can use your iPhone or iPad as a remote for your Apple TV.
How Do I Program My Remote To My TV
Turn on your TV or another device you wish to control. Press and hold the corresponding DEVICE and POWER buttons on the remote at the same time. Wait until the power button comes on and then release both buttons. Pointing the remote at the TV or another device, press the Power button on the remote and wait 2 seconds.
Read Also: Does Apple TV Have Local Channels
Apple TV Remote Not Working How To Unpair And Reset Your Apple TV Remote
Is your Apple TV box not responding to your Siri Remotes button presses? The Apple TV remote connection uses Bluetooth and is usually pretty reliable, however if it does stop working, your first troubleshooting step should be to reset the remote. Heres how to do it.
The Apple TV has shipped with a Siri Remote since the fourth-generation model, released in 2015. Therefore, the following instructions apply to Apple TV HD and Apple TV 4K. The same steps work for both the first- and second-generation Siri Remotes.
You may need to reset and repair the Apple TV remote if you find that button inputs are not being reflected on screen, or if the touchpad is no longer responsive. You may be pressing buttons on the remote but notice that the status indicator LED on the front of the Apple TV is not flashing to acknowledge it has received the command. In these cases, the reset steps below will generally help.
Some issues of this ilk are going to be caused by hardware faults, in which case you should contact Apple Support for repair options. However, in a lot of instances, a simple software reset will do the trick.
Firstly, ensure that the Apple TV Remote is holding sufficient charge. If you arent sure, plug it into a charger for a few minutes to guarantee it has enough power. Then, follow the steps below.
Apple TV Remote Wont Pair/connect
When you first set up your Apple TV, you have to go through the process of also pairing the remote control to the TV itself. The setup is relatively simple, but if you find yourself in a position where your Apple TV remote will not pair or will not connect to your TV, you may be wondering what could possibly be causing such a problematic error. Read below to find a solution when your Apple TV remote wont pair or connect.
If your Apple TV remote wont pair or connect, first check to make sure that the distance between your router and your Apple TV is close enough to ensure a strong signal. If the distance is too far, your remote control will have difficulty finding the signal which will cause it to not pair or connect as it should.
If your router and your Apple TV are within proper distance, you can always try to reset your remote control which can be found in the previous section Apple TV Remote Keeps Trying to Pair or you can set up your Apple TV Remote App on your iPhone or iPad. Simply download the app, go to Settings > Control Center > Customize Controls > Apple TV Remote, then tap the Apple TV remote and choose your Apple TV from the list to control it from the app.
You May Like: How Do I Get Showtime On My Smart TV
Apple TV Remote Not Working Here’s The Fix
If you’re an Apple TV owner and you’re anything like me, you’ve had your fair share of frustrations with the Siri Remote that came in the box with it. Perhaps it’s even become unresponsive, or incorrectly responsive. Maybe your original remote broke, and you need to pair a new one.
There are a lot of issues that can crop up with the Siri Remote. The good news is that many of them are easy to solve.