Thursday, May 19, 2022

How To Hide TV Wires

- Advertisement -

Don't Miss

Use A TV Cord Hiding Kit

How to Hide Your TV Wires for $10

If you want to mount your flat screen on the wall with a seamless look and no visible wires, you need to grab a TV cord hiding kit. These kits come with everything youll need to keep your TV cords out of sight safely.

Kits vary slightly, but most weve seen come with a plastic tube outfitted with connected outlets, a long extension cord, circular drill bit, wire snake, and a template to help make sure you lay everything out correctly.

Keep in mind that installing a power line behind a wall may not comply with National Electrical Codes . The plastic covers these kits come with are designed to keep the cords from overheating.

But you should understand the risks before using the kit. Do your research before starting this process to ensure your homes wiring complies with codes.

  • Power drill

Instructions

  • Put your mounting bracket up in the position you want the TV to be in. Decide where the holes should be located for the wires to travel through by using a stud finder. Ensure there is an open section behind the where the screen will be and down near the outlet.
  • The kit will come with a circular drill bit. Use your power drill to create the openings where youve planned.
  • Push the included plastic tube with the kits power cord inserted into it through the top hole. Then, pull the bottom end of the tube, so that its pointing straight down to the lower hole. Pull the kits power cord through the opening to be plugged into the nearby existing outlet.
  • Convert Them Into A Drawer

    Experiment with some new artistic alterations to a desk drawer. It can overcome the blot of a chunky power strip spread on the floor and flooding with the cables via a small hole fastened to your power drill. Make a hole with a machine into the back section of the desk drawer situated adjacent to a wall opening. Now, put the power strip cord via the hole and employ a two-sided binder to support the back of the power strip on a similar drawer panel. Now, when you attach the electronics into the power strip then try to make a place for each gadget to put in when it charges in the drawer. You can order this type of desk or LED Unitinto Gourmet homes and furnishers, for instance, Chawky LED Unit and Renaissance LED Unit.

    Stylish Ways To Hide TV Wires Without Cutting The Wall

    by James Mora | Safe Home

    The main reason I decided to organize and hide TV wires in my living room was that I simply didnt like the way they looked. They were ugly.

    However, theres another important reason to conceal them and thats safety. TV cords sometimes can be tripping hazards and theyre potentially dangerous for small children when they have access to them.

    If youre looking for stylish and quick solutions to conceal the jungle of cords without having to make any permanent changes, youre at the right place. Ive collected for you all the best ways you can hide your TV wires easily without cutting holes into the wall. Lets see them.

    Don’t Miss: Frndly TV Settings

    Make A Wood Frame And Cover It In Fabric To Hide Your Wires

    A wood frame can cover the tv wires and give it a cleaner look.

    The frame is typically made of wood or MDF, but it can be made of any material. A wooden frame is usually designed with a solid backboard , while MDF frames are often made with either a curved or straight backboard.

    Some simple creation steps if you dont wish to buy one include:

    Step 1: Measure the distance between the TV mount and the edge of the TV.

    Step 2: Cut a piece of plywood to the previously measured length.

    Step 3: Sand the edges and corners in order to make them look more attractive.

    Step 4: Paint your new frame with a color that matches your furniture or room decor.

    How To Hide Wires In Crown Moulding

    How to Hide Ugly TV Wires: My Latest TODAY Show Hack ...

    Crown moulding is effective in concealing the electrical wiring from an outlet, running cable from one part of a room to another, or hiding the wires of a sound system youre installing. If you are putting up crown moulding or taking down moulding youve previously installed, use cable raceways to enclose the wiring. These metallic or plastic channels can be installed along a wall or ceiling.

    Don’t Miss: How To Sync Your Phone To Your TV

    Invest In An Organizer To Hide The TV Wires

    A TV wire organizer is a device that helps organize the cords for your TV and other electronics. They usually have some form of the base that holds the wires in place while reducing the risk of them tangling. It can help make it easier to store your cords in a convenient location as well.

    TV wire organizers are an inexpensive device. They are available as either an adhesive strip or as an adhesive hook, so you will be able to find one with the type of design you are looking for.

    Create Art With Wires

    If you cant hide it, the next best thing is to make it look good. Get creative and tease the wires into interesting wire art, clipping the wires on the wall with wall clips or tape. You can convert the wire into a stem and paint leaves to complete your wall mural. You could also create an outline of a cityscape with tall buildings and houses, or transform it into a bamboo garden. The sky is the limit to your imagination.

    As you can see, there are many creative and functional ways to hide the wires behind your TV, without having to make structural changes in the wall. Which one did you like best? Tell us in the comments below.

    At HomeLane, we bring together functionality and aesthetics to provide homeowners with customised and efficient home designs. Our designers specialise in home interior designs and home décor, and help you create a personalised home to suit your lifestyle. From sophisticated living room designs to space-saving and clutter-free interior designs, we are here to help you find the best home decor and home design to match your needs and style. All our products come with upto 10-year warranty along with unwavering support and maintenance services. Explore thousands of inspiring interior designs or get a free estimate it’s all here on HomeLane.com, your one stop for complete home interiors.

    HomeLane

    Modular Kitchen

    Also Check: How To Cancel Frndly TV On Amazon

    Make A Wood Frame And Cover It In Fabric

    Its a creative way to hide TV cords without cutting the wall, however, you have to choose the fabric wisely. You want it to fit the wall color and the furniture in the room.

    For the frame, youll need four studs that you have to attach to each other with a few screws to get a rectangular shape.

    As a next step, you have to attach the fabric to the wood frame with staples and cut a hole for the TV mount. Use picture or wire hangers or adhesive strips to hang the frame on the wall.

    All the TV wires go behind the frame and remain hidden but, if necessary, theyre easily accessible. Wall mounted TV cable management at its best.

    You can buy all the necessary fixtures at your local hardware store.

    Add Bespoke Cabinetry To Reveal Your TV Remotely

    How To Hide Your TV Wires in 30 Minutes – DIY

    For an experience that makes the TV reveal almost as exciting as the film youre about to watch on it, you need the right mechanism and a bespoke-fitted panel.

    This TV set up includes a brilliant custom-built mechanism,’ says home technology expert James Ratcliffe of Homeplay.tv. ‘It is designed to retract and raise a luxurious stained-oak and bronze panel to reveal a 55 TV screen that elegantly glides forward.

    This piece also features an invisible 5.1 surround sound system built into the joinery, which creates an immersive sound experience that adds cinematic effect. And the best bit is that it can all be controlled via a simple to use, single remote control.

    You May Like: Samsung S20 Screen Mirroring Not Working

    TV Cord Hiding Installation Overview

    The outlet power is attached to a plastic tube that you place behind the wall via two holes that you drill into the wall behind the TV. Your TV cords run through the plastic tube.

    The top outlet has a power plug. This is where you plug in the TV. The kit has a power cable that you need to then plug into an existing wall electrical outlet that is low on the wall.

    Install A Raceway And Paint It The Same Color As The Wall

    Using a raceway is one of the most obvious solutions to organize and hide TV wires without cutting the wall. You can find many types of raceways online and in your local store as well.Most of them are made of plastic and have an adhesive strip on the back that allows an easy and quick mounting on the wall using no screws. Note that there are specific models for corners.

    Most TV cable management raceways are white and if your wall has a different color it wont blend in. You can solve this by painting the raceway before installation. Acrylic, model or enamel paint works great for plastic surfaces. Before painting, dont forget to clean the raceway with warm water and dish soap to remove any grease or dirt.

    This is the raceway I recommend because it is paintable and very easy to install due to the self-adhesive backing.

    Recommended Reading: How To Add Philo To Vizio Smart TV

    How To Hide A TV Cable

    This article was co-authored by Jesse Kuhlman. Jesse Kuhlman is a Master Electrician and the Owner of Kuhlman Electrician Services based in Massachusetts. Jesse specializes in all aspects of home/residential wiring, troubleshooting, generator installation, and WiFi thermostats. Jesse is also the author of four eBooks on home wiring including “Residential Electrical Troubleshooting” which covers basic electrical troubleshooting in residential homes.There are 9 references cited in this article, which can be found at the bottom of the page. This article has been viewed 16,728 times.

    Cables, while necessary, can make a room look disorganized or chaotic. This is especially true for televisions, since stray wires can distract from the screen itself and make it difficult to focus on your favorite shows, movies, and games. Thankfully, a variety of methods exist to help you successfully hide TV cables, ranging from full covers and molds to simple decorating tricks.

    TV Cables On A TV Stand

    How To Hide TV Wires In Or On The Wall

    Position cords out of sight along the back edges or underside of your TV stand using Command Cord Clips. To use, remove the adhesive and hold in place for 30 seconds, then wait one hour for them to set before using. These are user-friendly and also easy to remove and clean up after, making them a good choice if youre renting. You can use them on almost any surface and choose the configuration and number of clips to use. They are transparent and blend into furniture.

    Shop for an entertainment center that lends itself to keeping cords out of sight. Many come with holes already carved into the top to feed cords down into storage cabinets, and some have notches carved into a leg of the stand to hide cables that need to reach the floor. You can also use small hand saws to convert your TV stand into one featuring a small indentation down one of the back legs that hide cords just be sure to include ventilation as part of the plan in order to let heat escape.

    Even if its not part of your entertainment center, an adjacent cabinet or drawer in a buffet or side table can make a convenient place to sneak wires into. Run cords behind the piece or wherever you can carve a hole or find a spot to insert them. As with a cable management box, a cabinet or drawer space will afford plenty of room to store a full power strip with multiple cables and wrap their excess in neat bundles. You can even hide the electronics themselves and use the spot as a charging station for phones and tablets.

    Read Also: Does The Chosen App Cost Money

    Use A Cable Hiding Kit

    The simplest, easiest, and often the most inexpensive method is to use an external or on-wall cable hiding kit or cord concealer. Cord concealers can be found at online vendors starting for as little as $18 and work simply by holding all your cables or wires in a long half-cylinder that thats height-adjustable or easily cut to size, and is usually easily paintable or come in an off-white or white color that will go with most walls.

    Related:

    Hide TV Wires And Cables With An Over

    Image courtesy of Walmart

    Another great method to hide cords is to use an over-the-wall TV wall mount wire concealer. Wires are hidden beneath a plastic raceway, which can be secured to the wall either by an adhesive or screw-in wall anchors. Simply run the wire along the raceway, snap the plastic cover into place, and your cords are out of sight and mind. To help blend in even further, you can paint the wire concealer, which usually comes in neutral colors, to match your wall.

    You May Like: How To Watch Local Channels On iPhone

    Feed The Wires Behind The Wall

    To feed the wires behind the wall, grab a long piece of string, longer than the gap between your entry and exit points and tie a weight to one end, leaving enough string to tie to the wire, or the knot loose enough to undo.

    Drop this weight into the entry point and let gravity take the weight down behind the wall as you feed the string dont let go!

    Keep feeding down until you see it through the exit point . Grab it and pull through, without letting go of the top of the string.

    Options To Hide Wall Cables

    How to Hide TV Wires | Code Compliant TV Wiring

    For cables dangling from your wall-mounted TV and other wall-mounted devices, conceal them with plastic raceway cover kits which can be trimmed to any length and configured with corner pieces to any shape, or get rid of the cables altogether by hiding them in your wall.

    The SimpleCord Cable Concealer On-Wall cover kit, the Wiremold CordMate II raceway kit, the D-Line White Cable Raceway On-Wall cover, the LeGrand Wiremold CMK30 30-in cord cover kit, and the Yecaye CMC-03 One-Cord Channel Cable Concealer offers sleek, low-profile design and an easily-removable cover. These are neutral in color but all are paintable.

    To run cables into your wall, try a kit that includes grommets to thread cords through. The EchoGear In-Wall Cable Management Kit comes with a handsaw attachment to cut perfect holes into your drywall, and the outer bracket is easy to mount.

    Source: LeGrand

    The LeGrand Adorne In-Wall Cable Access Port comes in white and boasts a brush portal that nicely fills in space around cables and can fit several through the wall.

    If youd like to install an outlet behind your wall so your cord wont have to come back through, the upgraded EchoGear In-Wall Power Kit includes the easy-to-install grommets and also a user-friendly AC outlet setup.

    Source: Crutchfield

    The Sanus ELM806 PowerBridge provides two AC outlets and uses two rectangular cable plates to be installed behind the wall. The panels are pre-wired so that power connections can be set up easily.

    Also Check: Sling TV Shahid

    How To Hide Wires With Cord Covers

    Youll find a tangled mass of wires and cables in the area of the room where your TV is. Thats also where the cable box, DVD player and gaming system are along with their associated power cords. Hiding wires on a wall with a cord cover is uncomplicated and can be done in a short time.

    • Measure the wall to determine the length of the cords you want to cover.
    • Cut the cord cover to match the length you just measured.
    • Use a pencil to mark the anchor points on the wall. Use a level to ensure they are straight.
    • Use anchors and screws to mount the base of the cord cover to the drywall. The screws may either be included with the cord cover, or you will need to check manufacturers instructions to make sure you use the right sizes.
    • Lay the cables over the base and snap the cover on to conceal.
    • Paint the cover to blend it in with the wall.

    Tuck Away The Cable Box

    All your peripheral devicescable boxes, Apple TVs, Rokus, etc.add to the mess of wires and, lets face it, theyre not the most beautiful things to have in your line of vision during screen time. Consider hiding them in a functional piece of furniture like a sideboard or cabinet. If the piece doesnt have a hole for the wires, you can easily add one with a drill and a hole-cutter attachment. Should you not want to have to open the doors of your entertainment center every time you turn on the television, opt for an infrared receiver that connects directly to the cable box.

    Also Check: How To Add Discovery Plus In Lg Smart TV

    How To Hide Electrical Cords

    You can conceal power cords with a length of flex tubing and a few cable ties.

    • Bundle the cords with the cable ties and snip off the ends as needed.
    • Measure the length of the cords you want to conceal. Measure and cut the flex tubing to match the length. Cut the tubing lengthwise.
    • Pull the tube apart and wrap around the wires that were tied together.

    More articles

    - Advertisement -

    Popular Articles

    - Advertisement -