How To Pair Apple TV Remote Gen 2

How To Adjust Power And Volume Control

After your Siri Remote is programmed for your TV or home theater setup, you can selectively enabled or disable its power and volume functions.

Step 1: Go to Settings Remotes and Devices on your fourth-generation Apple TV.

Step 2: If you want waking your Apple TV to automatically turn on your television or receiver and switch to the correct HDMI input, select Turn On Your TV with Your Remote under the Home Theater Control heading. This will also shut down your TV or receiver when you put your Apple TV to sleep.

NOTE: Switching inputs requires a HDMI-CEC-compliant TV or receiver, or the Turn On Your TV with Your Remote feature will be greyed out.

Step 3: To enable volume control for a specific TV or receiver, choose Volume Control under the Home Theater Control heading and select a compatible device, or select OFF to disable volume control.

NOTE: Volume control uses the Siri Remotes built-in infrared blaster and works on both modern HDMI-CEC devices and legacy non-HDMI-CEC hardware. Power control requires an HDMI-CEC compatible device.

As a side-note, you might need to manually enable HDMI-CEC in your TV or receivers menu. This option might be also referred to as SimpLink, Anycast, EasyLink, Bravia Link, CEC or a similar name ending in Link or Sync.

Pair The Siri Remote With Apple TV

How To Pair Old Apple TV Remote

Once you have reset the remote, all you need to do is pair it with your Apple TV. Follow the below steps to solve your “Apple TV remote not working how to pair” issue

Step 1: Select the option for Settings on your aluminum or white remote.

Step 2: Once you are in Settings, go to General and then to Remotes.

Step 3: Click on the Pair Remote option using the new remote that you wish to use. After the pairing process is done, the option will change to Unpair Remote.

Recommended Reading: How To Connect Phone To Lg TV

How To Use The Redesigned Apple TV 4k Remote

The redesigned Apple TV 4K remote works a lot like the previous generation, with the notable removal of the touchpad and addition of the ring button and touch-enabled click pad. Touching the ring button on the cardinal directions allows you to navigate up, down easily, left, and right. The central touch-enabled clickpad is used for gesture-based navigation and controls and clicking things.

Here are the buttons on the redesigned Apple TV 4K remote and what they do:

Do You Need To Use Apple TV Remote

The truth is you dont. There are universal remotes that can pick up on Apple TV codes or the device can pick up on the remote. Access Apple TV Settings, choose Remotes and Devices, and select Learn Remote.

And there are universal remotes that dont even need this step, Logitechs Harmony devices, for example.

Read Also: Vizio Black Screen Of Death Repair

How To Pair Your iPhone Or iPad To The New Apple TV With The Remote App Using Home Sharing

You can also pair your device to your Apple TV via Home Sharing. Youll to enable Home Sharing on your Apple TV. Follow these steps:

Now that we have finished with that, we can open the Remote app on your iPhone or iPad and tap Home Sharing.

Back to the Phone

On your iPhone, iPad, or iPod touch, open the Remote app, tap Settings, and turn on Home Sharing. If you dont see this, Home Sharing is already turned on.

You may be asked to sign with your Apple ID. Be sure to use the same Apple ID that you use in iTunes or on your Apple TV.

If both your Apple TV and iPhone are using the same Apple ID your iOS device will show the Remote interface below:

Great success!

How To Manually Pair Your iPhone Or iPad To The New Apple TV With The Remote App

To get started, head over to the App Store on your iOS device. Find the free Remote app and download it onto your device.

Once downloaded, open the app and tap Add a Device . From there, you will see the instructions for what to do on the following page. Since we are pairing with an Apple TV, we will be focusing on that second paragraph. So, with your iPhone or iPad in hand, wake up your Apple TV if it isnt awake already.

On the new Apple TV, go to Settings -> Remotes and Devices to start the process of pairing your iPhone to the Apple TV.

*If you have an older Apple TV you will Go to Settings -> General -> Remotes. Wait for the name of your iOS device to appear at the bottom of this screen, select the name, and then enter the four-digit code.

In the Remotes and Devices sections, head down to Remote App located under the Other Devices heading. In the bottom-left youll see a small description of what pairing your Remote App can do.

Make sure that your iPhone is connected to the same Wi-Fi as your Apple TV and youll see your device appear under the Pairable Devices heading. Use the Apple TV remote or Siri Remote to click on your device.

Youll immediately see a four-digit code appear on your iPhone or iPad.

Enter this code into your Apple TV.

When the code you have entered is confirmed, your device will now appear under the Paired Devices heading.

This makes it so much easier whenever you need to enter in text on the Apple TV.

You May Like: Can I Get Basic Channels Without Cable Box

How To Program Siri Remote For Hdmi

Step 1: Go to Settings Remotes and Devices on your fourth-generation Apple TV.

Step 2: Select Volume Control under the Home Theater Control heading.

Step 3: If options labeled Auto, TV via IR or some such are available here, your TV or receiver supports HDMI-CEC and can be automatically linked to the Siri Remote here. If not, proceed with the manual setup, as detailed in the following section.

What If Youve Lost Your Apple TV Remote

Losing your Apple TV remote isnt the end of the world.

The good news is that you can use any of your iOS devices, including your iPhone, as a remote. Just follow these easy steps to get back to crushing through your quarantine Netflix queue:

If you cant find your Apple TV remote after a week or more , it might be time to buy a new remote.

You May Like: How To Order Netflix For My TV

Using A Remote Control

For Apple TV 1st, 2nd, and 3rd Generation white and aluminum remotes:

• For six seconds, press and hold the Menu and Right buttons together.
• Once paired, your Apple TV should display a message confirming that the remote is connected.

For the black/Siri remote, follow these steps:

The Apple TV and the Siri remote are immediately linked. If the remote becomes detached for any reason, or if youve purchased a replacement remote, youll need to manually pair it with your Apple TV.

To do so, take these steps:

A Siri Remote can only be used with one Apple TV at a time. When you pair a remote, it unpairs all of the previously paired remotes.

• To finish pairing, place the remote over the Apple TV.
• Press and hold the Menu and Volume Up/+ keys for around 2 seconds on the Siri Remote .
• Press and hold the Back and Volume Up/+ buttons for around 2 seconds on the Siri Remote .
• An On-Screen message will appear once the Siri Remote has been successfully linked.

Apple TV Remote Control Tips

The basic functionality of the Apple TV 4K remote control is easy enough to pick up once you know what the buttons do and youve used it for a while. Still, theres a lot of functionality that isnt immediately apparent.

Here are some tips for getting the most out of your Apple TV 4K remote:

• How do I get Siri to stop talking on my Apple TV?

  You can turn voiceover off using Apple’s accessibility settings. On Apple TV 4K or Apple TV HD, go to Settings > Accessibility > VoiceOver, and then turn VoiceOver off. Alternatively, hold the Siri button on your remote and say, “Turn VoiceOver off.”

• How do I connect a Siri remote to a different Apple TV?

  If you lose your Siri remote or otherwise need to pair a different remote with your TV, you might need to unpair it from the original TV first. To unpair, go to the Apple TV menu and select Settings> General > Remotes and Devices > Unpair Apple Remote. Then, on the new Apple TV, go to Settings > General > Remotes and Devices > Pair Apple Remote.

You May Like: Td Bank Atm Overdraft Limit

Pair The Remote Again

If the problem isnt just a dead remote, pair it again manually using the steps below:

Step 1: Check that your Apple TV has power.

You should see a small, white LED illuminated on the front. If not, unplug the power cable, wait 6 seconds, and then plug it back in. You should now see a shining, white LED.

Step 2: Make sure your TV is turned on, set to the correct HDMI port, and displaying the Apple TV home screen.

Step 3: Stand at least 3 inches away from the Apple TV unit, point the remote toward the TV, and then press and hold the Menu and Volume Up buttons for 5 seconds.

Step 4: If prompted, place the remote on top of the Apple TV device.

You should see a message confirming that your Apple TV remote was successfully paired. If you dont, and if the Apple TV still doesnt respond to button presses, continue to the next step.

Step 5: Unplug the Apple TV unit, wait 6 seconds, and then plug it back in .

Step 6: Repeat steps 2 to 4.

If, after trying all of these steps, your Apple TV remote still wont control your Apple TV, it could be defective. Unfortunately, this means youll need to call Apple support and/or head to the nearest Apple Store.

How To Control Your Mac With An Apple Remote

Apple used to include a small white or silver infrared remote control with some Macs, which allowed Mac users to control things like Keynote presentations and iTunes media from afar.When newer Macs no longer included an IR receiver Apple stopped including these remotes, but Apple TV owners can optionally use their Apple TV Remote to control their Mac, thanks to a free third-party Bluetooth macOS utility called SiriMote by Eternal Storms Software.

SiriMote isn’t available in the App Store, but you can download it directly from the Eternal Storms website . After downloading SiriMote, drag it from your Downloads folder to your Applications folder, then launch the app and follow the onscreen instructions to pair your Apple Remote with your Mac.

Also Check: How To Change Wifi On Firestick Without Remote

Siri Remote Or Apple TV Remote*

If you can’t pair your Siri Remote or Apple TV Remote , make sure that your Apple TV is updated to tvOS 14.5 or later. You can use the Apple TV Remote on your iPhone, iPad, or iPod touch to navigate your Apple TV to check which version of tvOS you have.

If you still need help, contact Apple Support.

*Apple TV 4K and Apple TV HD ship with the same remote everywhere. In countries and regions that support Siri, the remote is called Siri Remote. Elsewhere, its called Apple TV Remote. Siri works on either remote as long as your Apple TV 4K or Apple TV HD is set up with a language and country or region that supports Siri.

How To Reset An Apple TV Remote

There are several ways to reset your Apple TV remote, but the easiest and the one method that works for every model of remote is to simply unplug your Apple TV device.

1. Physically unplug your Apple TV and wait at least six seconds.

2. Plug your Apple TV back in. Wait for the home screen to reappear. Once it has, try to use your remote to see if this has reset the connection.

Don’t Miss: Beachbody On Demand App For Smart TV

Types Of Apple TV Remotes:

There are two types of Apple TV Remotes:

Apple TV Remote Not Working Here’s The Fix

If you’re an Apple TV owner and you’re anything like me, you’ve had your fair share of frustrations with the Siri Remote that came in the box with it. Perhaps it’s even become unresponsive, or incorrectly responsive. Maybe your original remote broke, and you need to pair a new one.

There are a lot of issues that can crop up with the Siri Remote. The good news is that many of them are easy to solve.

Don’t Miss: How To Add Apps To Philips Smart TV

Hdmi Cables: Hdmi 10 Vs Hdmi 20

One last thing: if you bought your HDMI cables a super long time agoIm talking before 2005then you may need to upgrade your cables. CEC was implemented starting in HDMI 1.2a in December 2005. Additional CEC features were added in HDMI 1.3, HDMI 1.4, and HDMI 2.0. Im not sure which version of CEC Apple TVs require, but if you bought an HDMI cable after 2013, chances are its an HDMI 2.0 cable and is fully supported. If you know for a fact that you have something earlier than HDMI 2.0 and it works, please let me know, since Im curious.

If you got HDMI 1.0 cables wired into your walls and ceilings like 15 years ago, then well sorry to be the bearer of bad news.

How To Use The Remote App To Control Apple TV

Although it looks different, the Remote app works very similar to the Siri Remote.

• Use the center of the screen like a track pad to swipe and tap, just like the track pad on the Siri Remote.
• Tap Menu to exit out of a screen.
• Press and hold Menu to go directly to the Home screen.

• Tap Play/Pause in the lower right corner of the screen to pause or play content.

• While content is playing, drag your finger across the screen to the left or right to rewind or skip ahead.

• While music is playing on Apple TV, tap Now Playing on the Remote app to access playback controls, like song skip, shuffle, and repeat.

• When in a text field, like searching or entering a password, a keyboard will automatically appear. Use the on-screen keyboard instead of swipe-to-type.

• If you don’t want the keyboard showing, tap Hide in the upper left corner of the screen.

• Tap the keyboard icon in the upper left corner of the screen to call up the keyboard again.

Read Also: Vizio TV Goes Black For A Second

Apple TV Does Not Respond To Any Commands Sent From Harmony

Apple TV may sometimes come linked with a specific Apple remote and will ignore commands sent from any other Apple or Harmony remote control. To allow Harmony to interact with your Apple TV, you must send an “unlink” command. You may send this using your Harmony remote.

Using a Harmony remote

Using the Harmony app

Before Resetting Apple TV Remote

If your Apple TV remote is not working and you have decided to reset the remote, then check these things before moving forward.

For Siri Remote

• Check if you are operating the remote within range of the Apple TV. Operating the remote out of the device’s range will yield not success even after resetting the remote.
• If you are within the range of your Apple TV and still there is no respond, look for any obstacles that come in between the remote and the TV.
• See if your Siri remote has enough battery. If it is running low on battery, charge it with a lightning cable and USB wall charger.
• You can also try unplugging your Apple TV from power outlet. Plug in the device after 6 seconds.
• You can also try operating the Apple TV remote with an aluminum or white remote. See if the old remote works on the new Apple TV.

For Aluminum or White Remote

• Check for anything that block the path between the Apple TV and the remote.
• Unlink your Apple TV and remote. Hold the Menu and Left button for 5 seconds. On your Apple TV, look for unlink icon and click it. Now link back your Apple TV and remote. Hold down Menu and Right button for 6 seconds. Look for link icon on Apple TV and click it.
• Try unplugging your Apple TV from power outlet. Plug in the device after 6 seconds.
• Check if the batteries are drained or not for the remote. Replace it with the new batteries for the remote to work better.

Don’t Miss: How To Screen Mirror Without Apple TV