How To Pair An Amazon Fire Stick Remote
To quickly pair an Amazon Fire TV Stick remote, press and hold the home button for 10 seconds or until the light at the top of your remote starts blinking quickly. You will see an on-screen message or the light on your remote will flash blue three times when it has been paired.
If that doesnt work, try resetting your remote by following the steps below:
Will Alexa Be Able To Control Fire TV Stick
Control your Fire TV with Alexa. Now that Amazon has added Alexa voice commands to the Fire TV and Fire TV Stick, it’s much easier to talk directly to them using voice commands. You’ll need a mic remote that came with your old Fire TV box or the new Fire TV Stick recently launched by Amazon in the UK.
Do I Need Multiple Fire Sticks For Multiple Devices
The answer depends on whether you want to use both devices simultaneously.If you dont want to run multiple devices simultaneously, then you can unplug the FireStick and use it with the other devices.However, if you want to use the devices simultaneously, then youll need a separate FireStick for each device.
Don’t Miss: Cast To Tcl Roku TV From Android
Turn On Enable Display Mirroring
Head into the settings of your Fire TV device and open the display and sounds tab. In this part of the settings, youll see an option to Enable Display Mirroring. While many devices should be able to mirror your Fire TV even without this mode enabled, turning this on will make it easier for other devices to find your Fire TV.
Pairing A Fire Stick Remote
When you buy a new Fire Stick or Fire TV device that comes with a remote, the remote should already be paired. That means when you first set up your Fire Stick, or Fire TV device, it should already recognize inputs from the remote without you having to do anything special.
In some cases, you may find that the Fire Stick and remote weren’t paired, or that your Fire Stick and remote became unpaired over time due to a glitch. When that happens, repairing the remote usually takes care of the problem.
When you buy a replacement remote, you always have to pair it before you can use it.
Here’s how to pair a Fire Stick remote:
Plug in your Fire Stick and make sure that it’s on.
Wait for the Fire TV to boot up.
Hold your remote near your Fire Stick.
Press and hold the Home button on your Fire TV remote.
Continue holding the Home button for at least 10 seconds.
Release the Home button, and see if the remote works.
If the remote still doesn’t work, try holding down the Home button again. It sometimes takes several attempts for this process to work.
Recommended Reading: Mirror Oculus Quest 2 To TV
Change The Input Source On The TV
Its just as important to change the source settings on your TV. Youll have to go into the settings menu to find the HDMI input. In the settings menu, this should be called out as HDMI ARC.
Once youve found the corresponding HDMI input the soundbar is connected to, select that setting so the TV receives the signal from the soundbar.
How To Turn On Your TV Using The Fire TV Remote
All hail our CEC overlords. All hail Alexa. All hail Amazon Fire TV!
The Amazon Fire TV Remote also known as the Alexa Voice Remote is found on every iteration of Fire TV, from the Fire TV Stick Lite at the low end the to the Fire TV Cube on the high end. And while it is not necessarily the world’s best remote control, it has gotten better . And it does have one traditional trick up its sleeve. You can use your Amazon Fire TV remote to turn turn on your television.
Provided, of course, that your TV has support for CEC. That’s short for Consumer Electronics Control, and the short version is that it allows a device connected via HDMI to control aspects of of your television. Various brands have named CEC various awful things like Sony’s Bravia Link or Sharp’s Aquos Link or Insignia’s INlink but they all do the same thing. They let components do things to your TV like turn it off and on, or control the volume. Or they let your TV remote control a Blu-Ray player.
And CEC allows Amazon Fire TV to do things like turn your TV off and on, or change inputs, or raise and lower the volume.
But if you’re like me and really don’t want to have to actually talk to your Amazon Fire TV Cube to turn things on, you’re in luck. You can use the remote. Yes, the same remote that doesn’t have anything that looks like a power button.
And that just makes being able to get to all those sweet free movies and shows available on Amazon Fire TV even easier.
Recommended Reading: How To Screen Mirror To Samsung TV
Fire TV Remote Broken: Solution 2
I took a flat head screwdriver and gently scraped the connectors of the Remote at each end. Wiping the residue off with a dry cloth as I scraped. The connector should look shiny and new again at the end of this process. I placed the batteries back in and the remote connected again straight away.
If you want to be a bit more professional, you can follow some of the suggestions in the comments and use a Qtip with some isopropyl.
Great news, Ive had no problems with the remote since and I guess the moral of the story is sometimes you get what you pay for utter crap leaky batteries this time around.
Use The Same Wifi Network
If things still arent working, make sure that both your Firestick and the device youre trying to mirror from are connected to the same WiFi network. Additionally, Amazon recommends that the devices are within 30 feet of each other, so if the connection isnt good, bringing them closer together can help.
Read Also: Airplay iPhone To Vizio TV
How Do I Connect My Comcast Remote To My Insignia TV
If it has a Setup button:
Connect The Fire TV Stick To An Hdmi Port On The TV
Once youve enabled the HDMI CEC feature, you want to plug the Fire Stick into the TVs HDMI port. To do this, youll need a USB cable which often comes with the Fire TV Stick. You have to be close to an outlet in order to connect the USB cable to the Fire Stick and then to a power adaptor. Its usually not a problem since your TV also has to be plugged into an electrical outlet, however, we do have an article here on how to extend HDMI cables.
Once the Fire Stick is connected to the TVs HDMI port and a power source, turn the television on and press Home on the remote. A screen should appear that states the Fire Stick is searching for your remote . From there, youll follow the instructions as they show up on the screen. When youve finished the installation steps your TV remote will control the Fire Stick.
Also Check: Oculus 2 Stream To TV
How To Connect Amazon Fire Stick To A Home Theater System
Today, with smart TVs further advancing home entertainment, having access to the broadest selection of viewing pleasures has never been easier. To make it even easier and more convenient, Amazon has created an innovative device called the Fire Stick.
It allows you remote access to all your favorite shows, on Netflix and all other broadcasting services, keeping your preferences and downloaded content in the comfort of your pocket.
You can take it with you wherever you go to connect it to any smart TV or device with HDMI ports, even hotel room entertainment systems. Here is a basic look at how the Amazon Fire Stick works.
How Do You Troubleshoot Amazon Fire Stick
On Amazon Fire TV, go to Settings > System > Network to make sure your connection is active and the signal strength is stable. Please make sure your application is up to date. They regularly release new versions of their apps that fix known issues and add new features. On the Amazon Fire TV homepage, scroll down to the Applications section.
Recommended Reading: Espn Plus Samsung TV
How To Pair A Fire TV Stick Remote
When you’re starting to set up a new Fire TV Stick, pairing the remote is one of the first steps you need to take. If all goes well, it should happen automatically:
If that doesn’t work, remove and reinsert the batteries to try again. Alternatively, you can use a manual setup by holding down the Home button for 10 to 20 seconds until it is paired.
Fire Stick Remotes And Interference
Bluetooth has some benefits over infrared, like how not having a line of sight between the remote and the Fire Stick only reduces the range instead of preventing the remote from working at all. However, Bluetooth remotes are susceptible to interference that infrared remotes aren’t.
Check to see if you have any of the following devices anywhere near your Fire Stick:
- Microwave ovens
- Wireless speakers
- Other wireless devices
If you have any wireless devices or anything else that could cause Bluetooth interference, in the vicinity of your Fire Stick, try moving them. If that isn’t an option, try shutting them down and unplugging them one at a time to see if that allows your Fire Stick remote to work. That should allow you to identify the source of the interference and deal with it accordingly.
Read Also: How Do You Screen Mirror On A Samsung TV
How To Unpair A Fire TV Stick Remote
Finally, you’ve connected up all your remotes, but now you want to remove one. You can do this by unpairing the remote from your Fire Stick.
Please note that you can’t unpair a remote if you’ve only got one set up.
How To Pair Amazon Fire Stick Remote
Second, you need to pair the remote with the TV. To do this, do the following:
- Use the batteries that come in the box to insert them into the back of the Fire Stick remote
- Then the remote control should automatically pair with the TV
- If not, just press and hold the home button
- The remote control should then pair with the Fire Stick
- Use Play/Pause to continue setting. This will include selecting your language and pressing OK
Don’t Miss: Apple TV Local
Enable Apps From Unknown Sources
The Kodi app isnt available on the Amazon Appstore. Firestick also doesnt allow you to download apps straight from your browser. This is why you have to download the app from a third-party website.
Before you can do that, you have to set your device to allow the installation of third-party apps.
Amazon considers installing apps from unknown sources a security threat. This is because open source apps can be manipulated easily, and potentially contain malware.
You should think hard before installing Kodi, as youll potentially be replacing safety with convenience. But if your Firestick malfunctions, you can just perform a factory reset.
How To Use Your Phone As A Fire Stick Remote
To use your phone as a Fire Stick remote, download and install the Amazon Fire TV app. Then open the app and select your Fire TV device. Log into your Amazon account and enter the PIN that you see on the TV screen into your phone.
Note: Your smartphone and Amazon Fire Stick need to be on the same Wi-Fi network for the app to work.
Also Check: Cast Phone To Tcl Roku TV
When Should You Unpair Your Remote
If youve lost your Fire Stick Remote, but you have a spare, but its already paired to another device, youll want to unpair before pairing it with your main Fire TV device.
In that case, youll have to unpair the remote with older devices before you pair it with your Fire Stick.
Also, if your device has been facing connectivity issues or if the Fire Stick isnt responding to button presses, unpairing and re-pairing the remote could take care of it.
However, you dont really have to buy a new Fire Stick Remote if yours stops working. There are great Fire Stick Replacement Remotes out there.
Use A Keyboard Or A Mouse As Firestick
How to find lost FireStick remote could be difficult but well tell you how to pair FireStick Remote with a keyboard or a mouse. Well, there is no need to use a keyboard or mouse unless you want to browse an internet sideloaded web browser. You can connect an external mouse by using a micro USB splitter from Amazon.
So these are some simple ways to answer how to find your lost amazon FireStick remote. The remote locator app is the official solution but if it doesnt work, use these tips and tricks to get easy access to your lost FireStick Remote. If you like our selection of ways to pair up your lost FireStick remote, stay connected with us for more technology-related tips that would make your life easier.
Read Also: Discovery Plus On Lg Content Store
Physically Connecting The Device
First, you should physically connect your Firestick to the LG smart TV and the power source. On the Firestick device, youll see two ports, a micro-USB and an HDMI. The micro-USB port is used for power supply.
Take the cable that arrived in the box and plug the micro-USB end into the Firestick and plug the other end into the provided power adapter. Then, plug the adapter into the preferred power outlet. This should get your Firestick up and running.
Plug the Firestick into the TVs HDMI port. Make sure that you memorize which HDMI port youve plugged it into.
How To Pair A Remote With An Amazon Fire TV
- Press the Home button on your Fire Stick remote.
- Then open the settings menu at the top of the screen.
- Then select Bluetooth drivers and devices.
- Then select the Amazon Fire TV remotes.
- Then select “Add New Remote”. Your Amazon Fire TV will search for discoverable remotes and display them in a list.
How To Pair An Additional Fire Stick Remote
Your Fire Stick can remember up to seven remotes at the same time, including third party remotes. If you have access to your original remote, and it still works, you can pair an additional Fire Stick remote through the settings menus.
If youve lost your original remote, you can still use this process. Just use the Fire TV remote app on your phone as a remote, and use the following procedure to pair your new remote.
Heres how to pair an additional Fire Stick remote:
Press the Home button on your existing remote or the Fire TV remote app to return to the home screen.
Select Controllers and Bluetooth Devices.
Select Amazon Fire TV Remotes.
Select Add New Remote
Press and hold the Home button on your new remote.
Wait for your Fire Stick to find your new remote, then press the Select button on your old remote.
When the process finishes, youll see both your old remote and your new remote in the list on the screen.
Enabling Cec On Your Fire Stick
Once youve enabled CEC on the TV, you should make sure that the option is also enabled on your Firestick. It is worth noting that CEC is usually enabled by default on most Firesticks, but it wouldnt hurt to double check.
These are the steps to enable CEC on your Fire TV:
After enabling CEC on your Firestick, you should be all set. For example, press the Home button on the Firestick remote and the TV should immediately turn on and display the Fire TV home screen. Turning off the TV is even simpler. Just tell Alexa to turn off your TV and she will do it for you. Different TVs offer different CEC capabilities, so you might have even more options.
Make sure to pair your Firestick with an Amazon Echo device, if you are using one of the older non-voice-operated models.
Also Check: Samsung Phone To Vizio TV