How Can I Hide The Components Behind My TV
How do I hide television accessories? Hook up the laces to the back of your furniture. Run the cords through a television stand. Hide the TV cables in plain sight. Place the TV cords behind the wall. Tuck the cord chaos into the tube. Slide them into a drawer. Place them using the skirting board complements.
Where Do You Put Cable Box For Wall Mounted TV Above Fireplace
Your cable box is going to need a place to sit when you install your TV above your fireplace. You can place it on the mantle if its wide enough. However, if theres not enough room, you can also have the cables run to a box in another room. Another thing that works is building a shelf just for your cable box.
Where To Put Cable Box For Wall Mounted TV
When you think about mounting your TV on a wall, the first thing you may be thinking where to put a scable box for wall mounted tv or for short: how to hide cables? Sometimes, when people install their TV on the wall, they simply leave all those cables lay on the wall which really looks like a mess of wires hanging down.
Before we get proceed any further, we highly recommend you get a fully articulating wall mount for installation of your TV.
Don’t Miss: When Will Lg TV Support Discovery Plus
Install A Raceway And Paint It The Same Color As The Wall
Using a raceway is one of the most obvious solutions to organize and hide TV wires without cutting the wall. You can find many types of raceways online and in your local store as well.Most of them are made of plastic and have an adhesive strip on the back that allows an easy and quick mounting on the wall using no screws. Note that there are specific models for corners.
Most TV cable management raceways are white and if your wall has a different color it wont blend in. You can solve this by painting the raceway before installation. Acrylic, model or enamel paint works great for plastic surfaces. Before painting, dont forget to clean the raceway with warm water and dish soap to remove any grease or dirt.
This is the raceway I recommend because it is paintable and very easy to install due to the self-adhesive backing.
Floating Wall Mount Underneath The Television
One idea for where to put your cable box is to use shelves that are also wall mounted. These are typically placed below the television and can accommodate multiple devices in a variety of arrangements. Floating wall-mounted cable boxes offer a few specific advantages and disadvantages:
Read Also: Lopez TV Show Cancelled
How Do I Hide One Connect Box
In order to properly hide One Connect Box& One Connect Cable up to code, youll need an AV Back Box for in-wall storage installed recessed into the wall behind the Frame TV or QLED TV. This AV Back Box will provide the space needed for One Connect Box and One Connect Cable to be nested & hidden behind the TV.
How To Hide TV Wires
Hiding TV wires is surprisingly easy! On a wall mounted TV, the biggest problem is messy wires dangling down from the back of your television. But this problem can be solved easily with a pack of VELCRO® Brand ONE-WRAP® Reusable Ties!
Wrap up each wire to shorten it and then secure it in place with one of our reusable cable ties. They even come in different colours so you can colour-code each wire.
You May Like: How To Airplay Without Apple TV
Installing Nearby Shelving Units
As with a mantle, using side shelves for the cable box is another cheaper and easy choice. A sensible alternative on how to hide a cable box next to a fireplace with decorations to make it look as stylish as possible.
Making the shelves out of wood to match the mantle would add geometric interest and symmetry. It would also be very simple to install and offer easy access to the cables and box while keeping everything tidy. Though it may not be the most aesthetic choice, it is a practical one.
I had found a multi-shelf unit resembling a stepladder which would have provided enough storage. As practical as it was, it took up too much space and did not go well with the rest of the room.
Turn Your TV Wires Into A Wall Art
Hiding the wires is not the only solution. Sometimes you can leave them in plain sight, and still make them look great. Turning your TV cords into wall art is a stylish and creative way to manage and organize them.
You can create anything from an abstract image to a silhouette of a city, object or person. If you want, you can decorate the cords with color tapes, ribbons or stickers to resemble flowers with leaves or anything else you like. Also, you can hang some postcards or giant letters. The only limit is your imagination.
Before mounting the wires, draw an outline on the wall with a pencil that can be erased easily. Measure the length of the cords and plan the artwork accordingly. You can mount the wires to the wall with wall clips or mounting tape.
Recommended Reading: Sling Com Get Shahid
Now That You Wall Mounted Your TV How Do You Hide The Cable Box
You finally did it, you hired a TV Installation Pro or used your DIY skills and wall mounted your TV. Feels better, doesnt it? Sleek and cleanoh wait, you still have your cords, cable box and components all over the place? Wall mounting your TV isnt the only solution to create the professional home theater setup you are looking forits really just the start.
Next is to deal with the TV components. You could purchase a horizontal wall mounted component shelf, but they are limited on how much weight they can handle being horizontal – some are even made of a flimsy plastic. Besides, you still have to look at it! So, how do you hide that ugly cable box?!
At HIDEit Mounts, we specialize in hiding your TV components BEHIND your TV. We started with wall mounts for game consoles but quickly realized that our customers wanted a cable box wall mount, too. Though Motorola and Scientific Atlanta make cable boxes and DVR receivers for many of the big companies like DISH, Comcast, Time Warner, U-verse and FiOS, they dont make them a consistent size – DirecTV makes their own satellite receivers and still have a variety of sizes available! We knew the best solution would be something that could work for all of them so we worked tirelessly to create an adjustable component wall mount. Now, we offer a complete line of Universal Mounts that will hold any cable box available.
Where Do You Put Your Cable Box When Mounting TV On Wall
All you need is to put the cable box behind the TV and ask a friend to change channels. You can mount one side into a stud if it is possible. Make sure no to drill a pilot hole when you mount the stud. For creating holes into a stud you need to use a mounting screw since the 3/16 drill bit seems too large.
Don’t Miss: How To Airplay On A Samsung TV
Hide Your TV Wires Behind A Panelboard
If youre feeling crafty, you can put up a panel to hide the wires hanging from your TV. Panelboards come in many sizes and designs. You can pick one up with a flashy pattern, or you can also choose something simple.
Cant find a pattern that you like? No problem! Cover the panel or board with fabric, and youre good to go. You can also paint it to match your wall or choose a design that will make your TV stand out. If you dont want to spend money on a panel and fabric, you can use wood pallets to hide the wires. You can paint the pallet board or leave it natural for a farmhouse or rustic design.
How Do I Connect My Cable Box To My TV Wirelessly
With a wireless video HDMI kit, simply connect a transmitter to the existing set top box in your living room and a receiver to your TV. Its a great option for people who dont want to run cables across the house. Instead, you and your friends can enjoy a wireless streaming experience wherever you place your TV.
Also Check: Philips Net TV Add Apps
So Where To Put The Cable Box For Wall Mounted TV
- Gather the required toolset
You will need the following tools in order to hide the cables successfully and place the cable box for wall mounted TV:
For hiding a cable box for a TV that is mounted on the wall you will need:
Many people place their power outlet behind the TV when they come up with an idea to mount. Although this is a great idea, others utilize cord overs to bring the wiring down to the closest power outlet which also results in a clean looking design.
· Locate the location for the mount
Before starting to drill, you need to ensure to leave enough space for all the wires. Discs from all devices must be removed before marking the holes with a level. Continue with removing the TV.
Before mounting a cable box we encourage you to get the cable box tested for its remote function. It can be easily tested. All you need is to put the cable box behind the TV and ask a friend to change channels.
· Check for studs
You can mount one side into a stud if it is possible. Make sure no to drill a pilot hole when you mount the stud.
For creating holes into a stud you need to use a mounting screw since the 3/16 drill bit seems too large.
You can, however, use a 3/16 drill bit to make holes into drywall. You can catch a collect any debris by holding a damp paper towel against the wall you are working by placing a paper just a few inches below.
· Lineup and tidy cords
Hide Your TV Wires In Plain Sight
This idea is perfect for the artsy person. With a little ingenuity, you can take your messy TV wires and turn them into art. All you need to do is use clear plastic cable clips, double-sided tape, adhesive, or any other unobtrusive method to create a design out of your wires.
If youre feeling more adventurous, you can also create more complex geometric patterns or use your TV wires to create a city skyline. One design that will no doubt appeal to techy homeowners is to form computer chip patterns using the TV wires.
You May Like: How Do I Use Airplay On My Samsung TV
Conceal TV Wires Behind Wall Trim
Its not the easiest and quickest way to hide your TV cords, but its certainly an eye-catching one. It can be a great solution when you want to hide TV wires over a fireplace.
Its major disadvantage is that the cables are not so easy to access under the trim work if you need to remove or add one in the future. Thats why I only recommend this method if youre willing to spend some time disassembling the trim work each time you add or remove a new device to your TV set .
So, the basic idea is to hide the cords in a channel formed by two slats and covered with a third one. Youll need to make both horizontal and vertical channels.
Before you start the execution, I suggest that you plan and design the trim work on paper, and test the length of the wires. You can paint the slats any color you like, but do that before mounting them on the wall . For more detailed instructions, visit this website.
Make A Wood Frame And Cover It In Fabric
Its a creative way to hide TV cords without cutting the wall, however, you have to choose the fabric wisely. You want it to fit the wall color and the furniture in the room.
For the frame, youll need four studs that you have to attach to each other with a few screws to get a rectangular shape.
As a next step, you have to attach the fabric to the wood frame with staples and cut a hole for the TV mount. Use picture or wire hangers or adhesive strips to hang the frame on the wall.
All the TV wires go behind the frame and remain hidden but, if necessary, theyre easily accessible. Wall mounted TV cable management at its best.
You can buy all the necessary fixtures at your local hardware store.
Don’t Miss: Can I Get Philo On My Samsung Smart TV
Mount The Cable Box On The Wall
If you want to mount the cable box on the wall, then you can use adhesive strips. However, if you want a more permanent solution, then we recommend installing the box on the wall. This ensures that there is enough room for the cable wires and the TV wires to reach a power outlet.
You will need the following tools to mount the cable box on the wall:
- HIDEit mounting hardware
Use a level to for the mount using a pencil. Make sure that you leave enough space behind the TV for all the cords and remove discs from all devices.
Check whether the remote works with the cable finder when the TV covers it. You can do this by placing the cable box behind the TV to check which angle suits best and then installing it there.
Remove the TV before you start mounting the cable box for convenience.
Try to mount one side of the cable box on a stud. Use a stud finder to locate it inside the wall. We recommend that you should not drill a pilot hole for this.
HIDEit hardware comes with anchors that can hold up to 25 pounds.
Use a mounting screw to create holes in a stud and use a 3/16 drill bit to drill into drywall. You can use a damp paper towel to catch the debris that falls out.
Drill the holes into the stud through the mounting bracket to make sure they are just the right size.
Insert screws into the holes to secure the mount and slide in the component.
Add all your devices and wires neatly to the mount.
Should I Put My TV Cable Box In A Media Cabinet
If you have lots of devices that you simply cannot do without such as a cable box, blu-ray player, games console, etc then you can still use a media cabinet.
A TV hovering above the cabinet can actually look quite cool, especially if you are able to hide the cables from the display into the wall for that super clean finish.
Read Also: How To Switch Amazon Accounts On Smart TV
Send Video From Across The Room
If there’s nowhere to hide your cable box, you can choose to put it in a nearby cabinet or closet and send the video signal and IR commands with a wireless HDMI kit. A basic kit, like the is easy to install and works at a distance of up to 150 feet. If you need even further range, the works at distances up to 600 feet. Price: $164.99 on IOGEAR, , pre-order for the Ultra Long Range 4K Kit for $599.95 on BHPhoto
If you need more range, the IOGEAR Wireless 5×2 Matrix Pro will do the trick. It’s capable of sending Full HD 1080p video to a receiver up to 200 feet away. And, you can add more than one receiver, so you could use the cable box in your living room to watch TV in your bedroom.Price: $899.95 for 2 receiver kit on IOGEAR, check price on
How Do You Hide Cables In A Solid Wall
Lets see them.
Recommended Reading: Can You Watch Local Channels On Apple TV
Hide Your Box Behind Some Decorations
Love the idea of having your cable box close to your TV, but hate the idea of actually seeing the box? We get it. It happens. Thats why it might make sense to hide it behind some decorations like a painting or photo. However, you will want to make sure that the surface youre setting it on is large enough to hold your cable box and the painting or photo too.
You can also purchase a little basket of fake flowers and hide your cable box behind them. Choose a darker colored flower since most boxes are black that way, it blends in a little better.