Friday, May 24, 2024

How To Change Input On Westinghouse TV Without Remote

- Advertisement -

Don't Miss

How To Turn On The TV Without A Remote Control

Westinghouse Roku TV: How to Use Button on TV (Change HDMI, Inputs, Turn On/Off, etc

So How to Turn on The TV Without a Remote Control? Most TVs have the power button located just underneath the screen, in the middle, right or left side. When you locate the button, just push and hold it for one second to power on your TV. If you want to power off your TV, use the same button.

But there are also other ways you can turn on your TV without remote control. Therefore to see all possible ways continue to read this article.

For those who didnt know, you can buyUniversal Remote Controlto turn almost all TV models.

Did you know that You Can Watch Video From Your Phone on Your TV? Check out to see how.

Changing TV Input With The X15 Remote

I press the TV input button and get a screen showing sources. But I can’t scroll among them or select one. No button seems to move the arrow or select.


2 y ago

Thank you.!! I had the same question re the X1 remote. Clicking the input button does scroll between the various connected inputs. Ifeel stupid . . . should have thought of that!


2 y ago


2 y ago

whats the point of having a TV input button in the Xfinity remote if you can’t scroll thru the inputs to change them?


2 y ago

Agree, how do we handle this?


2 y ago

So how do we handle it if that is needed and doesn’t work with the remote?


1 y ago


1 y ago

The trick is to wait a few seconds for the toggle to work. It delays, so does not seem to be working.


9 m ago

My older Samsung TV can scroll through the tv input list, but can’t select “ok” and the input list stayed on the screen. What I found worked was waiting until the tv actually switched the input, then hit the volume up or down. That gets you out of the input menu. You’re welcome ūüôā

How do I get the input side box to go away after hitting input?


8 m ago

So there’s no way to change the input on samsung smart tv with xfinity remote.. even if it works for volume, mute, etc?? We lost original remote for tv & trying to setup xfinity cable


I am an Official Xfinity Employee.

8 m ago


8 m ago


6 m ago


6 m ago

How To Change Input On Westinghouse TV Without Remote

Lost your Vesting Use TV Remote? 3

I have a 22-inch Westinguse LD2240 television. I recently lost the remote and it works on the TV. I have a sync XBOX that I would like to run from time to time, but I can’t switch to the AV function because I don’t have a remote.

Surprisingly, there is a menu in front of the TV showing a selection of TV, AV, YCPBR, HDMI, etc. Television. Why would they do that?

I find it foolish to have all or most of the functionality on the remote instead of the device. Someone gave me a Bose View radio that I use at work. And he has no control over it. Literally all functions are remote. What if I lose or lose my battery? I am Ed

There is a unique and hidden force in my foundation. Not anymore. Absolutely not. I just bought my 360 and wanted to configure it, but the TV remote broke a long time ago. I only have one Comcast remote that lets me see options like Tuner, Component and HDMI 1 and 2 , but I can’t select anything. Thank you Westinguse!

I played with my 40 for a while and found that I could open the source menu as soon as the source was turned on, toggle the modes with the channel up / form, but OK everything is volume +. It may have changed the font. You need a firmware update because it’s * not * intuitive. YMMV

I bought a universal remote control which is cheap and works well with TV.

Two volume controls at the same time let me select the input channel. It doesn’t work well for anything else. It only works with the TV, not the remote.

Recommended Reading: How To Broadcast Oculus Quest To TV

Pairing An Xfinity Xr15 Voice Remote

To pair your XR15 voice remote, long press on the Xfinity and Info buttons for 5 seconds and wait until the light on the remote turns green from red. Then type in the 3-digit pairing code on-screen.

Entering the correct code will pair your remote to the TV Box. Once that is done, follow the instructions on-screen to set up power, volume, and input controls for the TV.

How To Change TV Input With Xfinity Remote

TV isnt allowing to change inputs. Westinghouse ...
RobotPoweredHome is reader-supported. When you buy through links on my blog, I may earn an affiliate commission. As an Amazon Associate, I earn from qualifying purchases.

I was at a friends place recently, lazily flicking through the channels on his television.

I knew what channel I wanted but didnt know the number and so I was going through the grind trying to find it.

Thats when my friend comes over, coolly takes the remote from me, and speaks into the remote to find the channel we wanted.

Yes, he had the Xfinity XR voice remote, and he flexed hard on me with it. So predictably, I got an Xfinity connection for myself the very next day.

Took me a while to figure out how to pair up the remote and get familiar with it, but now that its done, the thing works like a charm.

Although, changing the TV input can be a little tricky, and Im sure youve figured that out by now if you are reading this. Dont worry, I got you. Let me tell you exactly how to go about it.

To change the input on your TV using the Xfinity remote, locate the input button on the Xfinity remote and press it to navigate between HDMI, USB, Component Video, etc.

There are a few different ways to go about programming and pairing your Xfinity remote to your TV and your Xfinity X1 TV box, depending upon the remote you own.

Lets take a look at how to do this.

You May Like: Philo On Smart TV

Devices You Can Connect To Your Inputs

Here are some of the devices you can connect to the various inputs on your TV now that you know what each input means

HDMI Playstation and other gaming consoles like Xbox and Wii, DVD players, or Laptops.

DVI Laptop/computers

VGA Laptops but without audio

USB Streaming devices besides that, you can even use it to charge your phone.

Ethernet Faster internet connection cable.

Additionally, you can even connect just audio devices like soundbars and speakers using the Optical Digital ports.

Pairing An Xfinity Xr11 Remote And The Xr5 Xr2 Remotes

After confirming that your TV input is connected to the Xfinity X1 TV Box, press the Setup button on the remote until the light on it turns green.

Then press the Xfinity button until the green light starts flashing .

Once that is done, the TV will instruct you to enter the 3-digit pairing code. If entered correctly, your remote will be paired to your TV Box.

You May Like: Sling Tudn

Use Your Siri Remote Or Apple TV Remote

Your Apple TV 4K or Apple TV HD should automatically detect the TV or receiver that you plug it into and program your Siri Remote or Apple TV Remote1 to control power and HDMI input.

Before using your Siri Remote or Apple TV Remote to control your TV or receiver, clear the path between your remote and the front of your television or receiver. Volume control normally works using the IR sensor2 on the front of your equipment.

If volume, power, or HDMI selection don’t automatically work for you, you might need to program your remote for volume or turn on HDMI-CEC on your TV or receiver.

What Can Be Configured Without A Remote Control

Changing Your TV’s Input Without A Remote 2019

Setting up any parameters without a remote control follows the same algorithm as described above. Among the main options on all TVs are provided:

  • Search and tuning of channels. It can be carried out in automatic or manual mode. After completion, be sure to confirm and save the settings.
  • Set contrast, brightness. The slider in this section can be moved using the volume buttons.
  • Selecting a signal source. Broadcast frequency and other technical parameters.

Important! After each setting, you must save the actions using the OK button. If this is not done, all entered parameters will be lost immediately upon exiting the menu.

You May Like: Philips Smart TV Apps Download

Supra TV Without A Remote Control

Most Supra TVs have buttons on the back. In the same place as the connectors for additional equipment. When turning on the Supra TV without your remote control, just follow these steps:

  • Power key to run. Menu to go to settings. And volume, channel switching for control.
  • There is an application for remote work from a smartphone.

Important! If you put parental control and do not set a password on it, after the remote control fails, you will not be able to control the equipment. Therefore, in advance in any model and brand of TV, configure the correct operation of Parental Control.

How Do I Connect My Universal Remote To My TV

Turn on your TV or another device you wish to control. Press and hold the corresponding DEVICE and POWER buttons on the remote at the same time. Wait until the power button comes on and then release both buttons. Pointing the remote at the TV or another device, press the Power button on the remote and wait 2 seconds.

Read Also: Samsung TV Airplay App

Those May Interest You:

Wow! The same “root cause” on 2 different TVs. Today my LG 55LM6700 got stuck on channel 6.1. Volume/Channel up/down would not work on the remote or TV side panel. Months earlier it was my Sony Bravia. It turned off when It reached a specific channel. When I turned it on, I would not have a chance to change the channel and it would turn off again. For both I unplugged the OTA antenna cable, scanned for channels , or delete the “bad” channel . Thanks a lot for your reminder tip.

Why Does My Westinghouse TV Say No Signal

RMT11 for Westinghouse¬ģ TVs

2 If you have your TV on the correct INPUT or SOURCE and you still see NO SIGNAL -Remove or unplug the power cable from the Cable TV or SAT set top box. -Plug the power cable back into your Cable or SAT set top box. -Give it some time for the Cable or SAT box to power up, get the signal, and initialize.

Read Also: Do Samsung TVs Have Airplay

Why Does Gethuman Write How

GetHuman has been working for over 10 years on sourcing information about big organizations like Westinghouse in order to help customers resolve customer service issues faster. We started with contact information and fastest ways to reach a human at big companies. Particularly ones with slow or complicated IVR or phone menu systems. Or companies that have self-serve help forums instead of a customer service department. From there, we realized that consumers still needed more detailed help solving the most common problems, so we expanded to this set of guides, which grows every day. And if you spot any issues with our How Do I Reset My Westinghouse TV Password? guide, please let us know by sending us feedback. We want to be as helpful as possible. If you appreciated this guide, please share it with your favorite people. Our free information and tools is powered by you, the customer. The more people that use it, the better it gets.


Possible Problems When Setting With Buttons

Keep in mind that it is not hard controlling the TV using the keys. Most people are not used to this option of switching programs. But sometimes the following difficulties are encountered:

  • Scrolling through settings. Especially when manually searching for channels. It takes a long time to search for the desired frequency and without remote control, more time is spent.
  • Failure of the buttons themselves. The keys on most CTR TVs have dust over time and may stop working. This will create great difficulties when tuning and switching channels.
  • Broadcasting through a set-top box. Button settings wont help. The receiver needs a separate remote control.
  • The child lock function is activated. This feature is here to ensure that kids do not touch the buttons on the TV.

What to do if the consoles remote control breaks down? Buy a new one. Keep in mind that during the replacement, you can easily switch the signal source to the antenna. And set up at least some channels through the keys on the TV.

Recommended Reading: Do Tcl TVs Have Airplay

Wait For The Reset To Finish

When you press on Restore Default, what itll do is reset your television to the default settings or the settings it had when you purchased it.

It will turn off and turn on by itself you just have to wait for a full minute.

After that, youre all set! Youve successfully reinitialized your system!

This 3-step process is everything you need to be able to reset your television.

However, there are instances where Westinghouse users wouldnt have a remote control.

It could be because its broken and youre yet to receive a replacement, or some of the buttons could be broken and pressed down, making them incapable of being pressed, etc.

Fortunately, theres an easy way of resetting the settings back to default even if you dont have a controller!

Pairing The Xr15 Remote To Your TV

How to change TV to Input mode (without remote control)
  • Switch on your TV and long-press the Xfinity and Mute buttons on the remote for 5 seconds until the light turns green.
  • Enter the 5-digit code listed for the TV manufacturer. The light on the remote should blink as each digit is entered. Once the code is entered, the remote light blinks to show if the code is valid .
  • With the remote aimed at the TV, press the Power button.
    • If it turns off, turn the TV back on and check if the Volume and Mute buttons are functional.
    • If it does not turn off, repeat the process with the next code on the TV manufacturer device.

    Recommended Reading: How To Project Oculus Quest 2 To TV

    Program Remote For A Standard Dvr Or Sd Receiver

  • Press MENU on your remote.
  • Select Parental Favs & Setup> System Setup> Remote or Remote Control> Program Remote.
  • Choose the device you wish to program. If you dont see your TV or device listed, use the code lookup tool to find the 5-digit code.
  • Follow the on-screen prompts to complete the programming.
  • Change your TVs input source

  • At the top of the remote, slide the mode switch to TV.
  • Press and hold the MUTE and SELECT buttons at the same time. Stop when the green light at the top of your remote flashes twice.
  • Enter 960 using the keypad on the remote control. The green light should flash twice again.
  • At the top of the remote, slide the mode switch to the DIRECTV logo.
  • More remote help

    Buttons On TV Don’t Work And Only Power Button On Remote

    Hi, all the buttons on my tv don’t work and only the power button on the remote. Is there any way to fix this?

    First leave the unit unplugged from the AC outlet for about 10 minutes. Plug it back and try if the buttons will work this time. I also suspect that your TV set is in a LOCK state. Some TV brands have this feature to LOCK CHANNELS, Front TV buttons and remote control command. Please check the model number and include it in your next post.

    There is an option to lock the buttons on the TV’s front panel.

    2. Press Left or Right arrow button to select Parental Control, press ENTER.

    3. It will ask for a 4-digit code. The default is ‘0000’ that is four zeros if you have not change it previously.4

    4. Press Down and Up arrow buttons to highlight FRONT PANEL LOCK then ENTER.

    5. Select unlock. Press ENTER. Press MENU to exit menu.

    The menu button on the remote does not work nor does the one on the tv. When I turn on the tv, it is stuck on the built in DVD input.

    Locate the DVD EJECT button on the TV side panel. It is located on the TV’s right side.

    press the EJECT button on the side panel, hold then

    press the power button on the remote control. Release the power button but hold the the EJECT button for 2 seconds more

    The previous procedure may reset and release your TV stucked in DVD mode.

    Could be a problem with the control circuit. I recommend you have it checked by a qualified service technician.

    Good Luck!

    You May Like: Vizio TV Won T Screen Mirror

    Use A Home Theater Remote

    You can use a home theater remote, like a network-based remote for home-control systems or an infrared remote , to control your Apple TV.

    To set up your home theater remote to control your Apple TV:

  • Add your Apple TV to the Home app and make sure that you assign it to a room.
  • Add the remote to the Home app on an iOS or iPadOS device and make sure that you assign it to a room.
  • After you add the remote to the Home app, you can use it to control any Apple TV that you have in your home.

    To learn different ways you can use your remote to control your Apple TV, go to Settings > Remotes and Devices and select Learn Remote.

    If you have issues with your remote or want to learn more about using your remote to control Apple TV, contact the manufacturer or visit their website.

    How Do You Access The Service Menu On A Westinghouse TV

    Westinghouse Roku TV User Manual

    Service Menu Instructions With the set OFF, Press and Hold the VOL + Input buttons on the right side of the set. Holding these buttons, press If done correctly, the Westinghouse Logo on the front of the set will begin to blink. From the Remote Control, press the RETURN key. You have now entered.

    Previous Post

    Also Check: Does Sling TV Have Tudn

    More articles

    - Advertisement -

    Popular Articles

    - Advertisement -