Wednesday, May 25, 2022

How To Hang TV On Brick Fireplace

- Advertisement -

Don't Miss

How High Should You Install A TV Mount On A Wall

How To Hang a flat panel tv on a brick fireplace

The actual height you mount your TV will depend on the layout of your room. If youre mounting it above a fireplace or in an alcove, the height of these structures will determine the mounting height of your TV. However, Bob Villa recommends positioning your TV 42 inches on-center in conventional rooms with standard seated viewing.

Buying A TV Mount For A Fireplace

The important search term if shopping online or in-person is: full motion TV mount. There are also mounts on the market that swing horizontally but thats not really what you need for a fireplace.

The high viewing angle requires a full motion mount that has tilt capability as well as articulation. The vertical adjustments on the mount can allow you to watch TV at a more pleasing viewing angle, then pull the TV back up when not in use to take up less space by the fireplace.

How To Mount TV Over Fireplace And Hide Wires:

To start, I had to remove the tongue and groove, but you will probably just have drywall. If you have brick this technique will still work but you will it will take a little more effort. Heres a tutorial for screwing into brick: HERE.

  • I used 2×2 pieces of wood to create a frame around the fireplace, securing it with 3 inch screws.
  • I found the studs with a stud finder and marked them on the wall.
  • Then I added a 2×4 horizontally where I wanted to mount the TV and secured it into the studs.
  • Next, I added in some scrap 2×1s and 2×4s to create a base to screw a solid piece of masonite.
  • I drilled a hole right above the mantel and created a channel to feed the cord through. Our box for the TV is in the cabinet.

If you dont have built-ins beside your TV, just leave a small opening for the cord when you are attaching the 2×2s.

  • I had the hardware store cut a piece of masonite to fit the exact dimensions I need to cover the wall from the mantel to the ceiling. I chose masonite because its so thin, but if you prefer wood, plywood would also work.
  • I attached the masonite to the wooden frame I built with nails and then finished it off the edges with molding.
  • I make sure I had the placement of the television in the correct spot, I used the template that came with it to pre-drill the holes and cut the opening for the cord.

You can see in the next photo, how it looked with the bracket and cut out for the wires.

You can see in the next picture where the holes are for the cable.

Recommended Reading: Can You Add Apps To A Philips Smart TV

Can A TV Be Mounted Above A Fireplace

You may be able to mount your flat screen TV above your fireplace for a more streamlined look in your living room. In fact, TV mounting professionals can hang your flat screen TV flush with a wall or from a tilting or full-motion bracket mount in any room in your home. A tilting or full-motion mount may be the best option above a fireplace so you can tilt the TV down for the best viewing angle. Whether the wall above your fireplace is brick, drywall, concrete, stone or plaster, most television mounting services can accommodate your needs. Hardier wall surfaces like concrete or brick will require more labor and expertise to mount, and will likely have a higher price range.

If you want your AV and cable wires hidden in the wall, you will also pay a higher price due to the added time and skill to properly drill the holes and run wires. Before mounting your TV above your fireplace, consult with the manufacturer about necessary distance from heat sources. If the space above your fireplace gets too warm, another location could be better for the longevity of your TV. Your television mounting services may take between one and two hours, or more depending on your home theater setup.

How To Anchor A Flat Panel TV Monitor To A Brickmasonry Or Concretesurface

How To Hang a flat panel tv on a brick fireplace

by Bob Carlisle, President ofConcrete Fasteners and Tawny Sikon

Mounting a flat screen television over a fireplace has become quite popular.However, certain precautions must be considered to ensure that the TV doesn’tget damaged by the heat. Before installation, experiment with thermometers tomake sure that the temperatures generated by the fireplace during normal use arewithin the heat guidelines in the user manual. Anchoring a flat TV above afireplace is usually harmless with the appropriate distance and properventilation.

Recommended Reading: Vizio Airplay

Its A Pain In The Neck

Placing a TV up high or above a fireplace moves the image youre trying to watch well above eye level which is considered the ideal viewing experience. And while many people prefer a raised setup and might not have any issues with it, theres a chance it could cause some discomfort. Think back to the last time you went to the movie theater and had to sit in one of the front three rows. Chances are you walked out of the theater with a stiff neck. Craning your neck into an unnatural position for an extended period will cause temporary discomfort, but doing so for even short periods, day after day, can have lasting effects, like chronic headaches.

Neck headaches become a problem when you start protruding your chin forward with that looking up posture.

We spoke to Brad Simpson, a physical therapist and clinical director at Lifes Work Physical Therapy. Simpsons clinic treats patients with multiple types of musculoskeletal problems, and he is an expert in ergonomics. Simpson says that repeatedly sitting in an unnatural position can have lasting repercussions.

How Do You Install A TV Over A Fireplace

Install the base above the fireplace. While holding it in place, drill the thick screws that came with the bracket through the four holes you made. Place the front of the TV stand on the back of the TV. Use the screws provided with the bracket to secure the ring in place and hold the TV securely.

Mounting tv on brick wallHow do you mount a TV on a brick wall? Attach the brackets to the back of the flat screen TV and attach the wall bracket to the brackets on the TV. Then have two friends hold the TV against the wall and find the perfect place to mount the TV on the wall. Standing against a wall, walk over to the TV and mark with a pencil where you want to mount the wall mount on the wall. How to mount a TV over a brick fireplace? Determine

Recommended Reading: How To Get Airplay Code For Samsung TV

Is Mounting A TV On An Uneven Stone Fireplace Wall Safe

When installed correctly, mounting your TV on an uneven stone fireplace wall is just as safe as mounting it on a plasterboard or drywall surface.

However, you may be required to do some extra preparation work in order to ensure the mount will lay flush and steady against the wall on the mounting points.

This may involve checking for stones that stick out further than the rest and chiseling those down so they dont cause any obstructions with the TV wall mount.

What Is A TV Mount

Wall Mount TV Over a Brick Fireplace

Stands for televisions. Fixed mounts, also known as flat or low mounts, allow you to hang your TV on the wall. The footrests have a similar configuration, but allow the TV to tilt up or down for a better viewing angle. The swivel arms provide greater freedom of movement, allowing you to turn and tilt the TV up or down.

Read Also: Does Apple TV Have Local Channels For Free

How Many Inches Should A TV Be Above A Fireplace

Another popular question people have when they purchase a TV mount is how high should a TV be mount above their fireplace? The rule of thumb is, if your mantel is less than four feet from the floor, you should mount your TV about 12 inches above it. This rule applies to a fireplace without a mantel as well.

For Larger Heavier TVs Concrete Screws Are Recommended But For Lighter TVs Plastic Wall Anchor Screws Installed Correctly Are More Than Sufficient

These screws have a special thread that will pierce into the brick masonry and will hold up your tv after you finish installing the wall mount tv kit. It wasnt easy, it took some time and it. If you are considering mounting a tv above a brick fireplace, you should be prepared for a little extra work.

Also Check: Lg TV Screen Mirroring Samsung

How To Wall Mount A TV

1) Choose a bracket for your TV. The first step in learning how to mount a television is to choose a wall mount. 2) Choose a location and an altitude. Mounting your television on the wall takes some planning. 3) Locate the screws. 4) Mark the pilot holes. 5) Install the wall bracket. 6) Fix the bracket to the wall. 7) Attach the mounting plate to the TV. 8) Mount the TV on the wall.

How To Prepare An Uneven Stone Surface Above The Fireplace Before Mounting A TV

How to Mount a TV on a Brick Fireplace (Updated)

If your stone surface is made from uneven rocks bricks or stones, you might find it difficult to get a proper and safe mounting location for your TV.

In this case, using a masonry chisel and hammer is a great way to smooth uneven stone if possible.

You can also use an angle grinder to cut large chunks that are sitting out, while using a straight edge like a level, to check for humps that need to be removed.

You can smooth the stone that is directly behind the TV so there is no issue with a stone causing the bracket to move, rock, or twist when the TV mount is fastened to the wall.

You only need to smooth the stone in the four corners where the mounting bracket will attach with the fasteners, make sure there are no humps in the middle, by checking with the level.

This helps ensure you get a safe and secure connection between the mounting bracket and your main wall supports.

Don’t Miss: Use Airplay On Samsung TV

Does Heat From Fireplace Damage TV

The short answer is yes. However, to ensure your television isn’t damaged from the heat, care must be taken to ensure heat generated by the fireplace is redirected away from television. There are several ways to do this, such as installing a proper mantel and building an alcove for the television.

Ideas For A TV Above A Fireplace

A dual-purpose entertainment center can be created by hanging a flat-screen above a mantel or on the face of a brick fireplace. The TV-hearth combination frees up valuable floor space. However, this combo poses some challenges to consider before doing so and requires a bit of research and extra care to get right.

Above your fireplace may seem like the ideal location for a TV, but fireplaces are more complicated than your standard drywall, so there are a few things everyone should absolutely be aware of before picking up the hammer.

We spoke to a handful of experts to get their insights on the best way to go about this cozy, dual-purpose entertainment center. Read on if youre curious to find out the most aesthetically pleasing ways to mount a TV above a fireplace.

Also Check: How To Get Philo On Samsung TV

Is It Safe To Hang A TV Over A Fireplace

Here’s what you need to know to safely hang your TV over your fireplace! Hanging a television over a fireplace is one of the hottest home design trends, and it’s no wonder why. Create a sleek and elegant look by integrating the lobby and entertainment areas at a central point.

How Far Apart Are Studs Above FireplaceAre there rivets behind a fireplace?Most homes are built with 16 posts in the middle, which means there should be 16 posts at a time. Keep this in mind if you have trouble finding the bolts above the chimney. Dont worry if you find a stick while putting on a large TV or other heavy object. So you may be wondering how do you find the spikes behind a stone fireplace?Re: How are nails located behind a wall?Use a very strong magnet or metal detector t

What Type Of TV Mount Do I Need

Easy Brick Fireplace TV Articulated Wall Mounting DIY Video Charlotte NC

There are several types of TV mounts, including fixed mounts, tilting mounts and full-motion mounts. A fixed mount is sturdy but offers no movement, and a tilting mount tilts vertically. A full-motion TV mount swivels and tilts for the maximum number of possible viewing options. You can also mount your TV from above with a ceiling TV mount. Whichever TV mount you choose, ensure it can support your TVs weight and size. If you need help choosing and installing a TV mount, contact a TV wall mount installer near you.

Read Also: How To Cast Peloton To Samsung TV

How Do You Mount A TV To Brick

Drive a concrete screw with a threaded washer into the screw through the bracket and into the hole. Use a screwdriver or wrench to slowly drive the screw into the masonry, brick, or concrete wall. Do not overtighten the screw or it will not work properly.

Brick wall anchorsWhat are the best screws for brick? Tapcon is screwed to a brick. Tapcon concrete screws are suitable for use in a variety of base materials, including brick and mortar joints between bricks. What anchor should you use with a concrete block wall?There are four options that can be used on concrete blocks: Bolt anchor – where the bolt protrudes from the wall. Example: anchor sleeve. Hammer Anchors – Where the bolt does not pr

Assess Your Brick Wall Condition

With this installation method your hanging the weight of the TV mount and TV entirely from the brick wall. This is for real brick walls only that are built using brick and cement.Not thin brick veneer. And the condition of the brick matters.

If your brick wall is old and brittle then it may not be able to hold the weight of your TV. Once you determine and mark the location of the TV mount inspect the area to make sure your bricks arent brittle or breaking. Youll be able to see if the bricks are string enough to hold the TV. If you can break them with your hand then they may not be strong enough.

In the case that the bricks arent strong enough to hold the TV then I recommend pointing the area. Most bricks are weak because of the mortar and not the bricks themselves. But if youve got both brick damage and bad mortar its not that hard to break out the old bricks and install new ones.

Making sure your brick wall is strong enough to support the weight of your TV is a very important step and shouldnt be avoided.

You May Like: Philo Samsung App

Hang A TV On A Brick Or Concrete Wall

This post may contain affiliate links, it helps us pay the bills, more info here.

Hang a TV on a brick wall, or hang a tv above the fireplace? Heres how to do it right. Below the how to photos is a video of how to drill into brick or cement and links to other DIY articles.

Sleeve or Wedge Anchors are best for cement or brick walls

Working in older buildings, many times Im asked to hang a TV on a brick or cement wall. In brownstones, many times people want to hang a HDTV or flat panel TV over the fireplace. Most of the fireplaces no longer function, being old coal or gas fireplaces. Be sure not to drill holes into the chimney of functioning fireplace. If youd like to hide the wires, like we did in the top photo, we use plastic raceway molding.

To hang a TV on a brick or cement wall, you will need sleeve or wedge anchors. You could also use lead anchors and lag bolts, but I prefer to use sleeve anchors. You will also need a hammer drill.

. Or you can ask one of your friends if they have one. Youll also need masonry bits for a hammer drill, they are also called percussive bits in some places.

Hammer drill and the dust it creates

Hammer drills are loud, so use ear protection, and eye protection is of course an always must have.

Hanging a TV with a HDTV mount is one of those projects that falls into the if all else fails, read directions . So read the directions before trying to do this.

Wall mount attached with sleeve anchors

Use Only An Appropriately Sized Anchor For Your Specific Setup

TV Mounted on a Brick Fireplace in Lexington, Kentucky ...

We cannot recommend the correct size because every home has a unique fireplace and hearth setup. So what works at your neighbors house may very well not work for your home.

Youll want to use multiple right-sized anchors 4-inches is usually good. Just remember youre attaching a heavy object to a structure that MIGHT not be as sturdy as sheetrock and 2×4 wall.

Remember, youre bolting the television to a single wall of brick, NOT the chimney.

Another thing to remember is that this project requires more than your standard drill and drill bit set. Here are a few tools youll likely need to mount a tv above a fireplace: Anchors, a hammer drill, a high-impact drill and bits, and a dry shop vacuum.

Dont let common sense mislead you when choosing your mounting anchors

When planning this project, youll likely consider the weight of a big-screen television. It might even SEEM like a great idea to use extra-long anchors to make sure your fireplace tv is mounted in the brick or wall solid enough that it wont shift or fall out. However, that common sense is misleading in this case. Allow us to explain:

First, while there may be times when it works, if youre not familiar with the inner workings of your fireplace and chimney, then we advise you NOT to use extra-long anchors unnecessarily. When doing so, youd run the risk of causing damage to a structure this is difficult and costly to repair.

Recommended Reading: How To Connect Your Phone To Your Vizio TV

More articles

- Advertisement -

Popular Articles

- Advertisement -