Saturday, June 15, 2024

How Do I Pair My Roku Remote To My TV

- Advertisement -

Don't Miss

How To Manually Pair A Remote From Roku

Roku remote pairing and troubleshooting

Keep the Roku remote near the Roku streaming device within a few feet and use fresh working batteries. Plug the Roku streaming player back in after unplugging it for two minutes.

  • While the Roku is in the guided setup stage, it might advise you to connect the remote once it reboots.
  • The remote may not need to be paired if you already have it configured on your Roku.
  • On the Roku remote, remove the compartment where the batteries are present.
  • You will find a Reset Button there which needs to be pressed for about 5 seconds
  • As a result, the remote control has been paired and can be used now.
  • Can You Replace Roku Remote

    The Roku remote is an essential part of the Roku streaming experience, so if its lost or broken, youll need to replace it. You can purchase a new Roku remote from the Roku website or from a variety of other retailers. Once you have your new remote, youll need to pair it with your Roku device. To do this, go to the Roku Settings menu and select Remote & Devices. Here, you should see an option to Add New Remote. Select this option and follow the instructions on-screen to complete the pairing process.

    Determine Which Roku Remote You Have

    Whether youre setting up a new Roku device or your remote and streaming device have become unpaired, the process of linking them back up will be the same.

    Your first step will be to determine which type of remote you have: a Roku simple remote or a Roku voice remote. If your remote has a microphone icon beneath its purple directional pad, then its a voice remote. If it doesnt, its a simple remote.

    You May Like: How Do You Get Discovery Plus On Your TV

    Simple And Enhanced Roku Remotes

    A Simple Roku IR Remote or an old remote for Roku uses standard infrared technology to control the Roku player. It was designed to only control your Roku device. This standard IR Roku remote cannot control your TV.

    If you have bought a standard IR remote to pair it, please return it .

    These IR sensor remotes were never meant to be paired and work out of the box to control Roku.

    An Enhanced Roku Remote or a voice remote, on the other hand, can be paired, even without using the pairing button.

    You cannot use an enhanced remote without pairing it with your Roku device.

    To identify an enhanced remote, look for a microphone button on the remote.

    Alternatively, check the back of the remote or inside the battery compartment for a pairing button. Only Roku-enhanced remotes have these buttons.

    How Can I Control My Roku Without A Remote

    Roku Phone Remote

    One way is to use the Roku mobile app. The Roku mobile app is available for iOS and Android devices and can be used to control your Roku. Another way to control your Roku without a remote is to use the Roku remote control website. The Roku remote control website is a website that allows you to control your Roku with a computer or mobile device.

    Read Also: What TV Channels Does Disney Own

    What Is The Pairing Button On A Roku Remote

    The pairing button on a Roku remote helps you connect your device to the remote, allowing you to control it from a distance.

    Youll mostly find the pairing button on the front of the remote. Other times, it can be located underneath the battery compartment.

    To sync your device using the Roku remote, press the pairing button until you see the light coming from the top of the remote.

    How To Pair A Roku Point Anywhere Or Enhanced Remote

    Standard and Enhanced Point Anywhere remotes, on the other hand, use RF , Bluetooth, orWi-Fi Direct and don’t need line-of-sight but must be paired with a Roku device before they can be used.

    To identify an Enhanced remote, look for one or more of the following features:

    • Power and on/off button for a TV.
    • Two gaming control buttons .
    • Headphone jack.
    • Remote finder alert.

    If you’re setting up a Roku box, stick, or TV that comes with a point anywhere/enhanced remote for the first time, follow these steps:

  • Insert the batteries.

  • Make sure the Roku TV or player is on.

  • Hold or place the remote close to your device. The Roku TV or player will detect the remote and execute pairing automatically.

  • Don’t Miss: What Is The Best Way To Watch TV

    Pairing A Roku Voice Remote Pro

    If youre trying to pair a Roku Voice Remote Pro in addition to the remote that came with your Roku, youll want to ensure that the streaming box is running Roku OS 9.4 or higher. To do so, press the Home button on your remote, and then go to Settings > System and select System Update. Then, select Check Now, and the system will check for and install the latest update if necessary.

    If your remote isnt working and youre not able to do this, go ahead and try the pairing process anywayif you have a recent enough OS version, it will work. If it doesnt, it might help to know that most Roku remotes are interchangeable. If you have another voice remote at home, you could try pairing it and using it on the streaming box to download any needed updates. Alternatively, the Roku app on your smartphone could also get the job done.

    How To Sync Roku Remote Without A Pairing Button

    How to pair a Roku remote to your TV and Roku

    Posted on Last updated:

    Categories How-To

    Roku is a well-known brand in the world of streaming devices. You must have seen it on eBay, Best Buy, or . The idea behind Roku was to create a device to allow people to stream Netflix on their TVs. However, it was later decided to drop the project and Netflix spun off Roku as its own company.

    According to SEC S-1, As of June 30, 2017, Roku had 15.1 million active accounts. Roku users streamed more than 6.7 billion hours on the Roku platform in six months, a 62% growth in six months.

    After seeing these stats, you decided to buy a Roku device and cant wait to use it. The problem, however, is that your Roku remote either lacks a pairing button or may not even have one. Now that there isnt a pairing button, youre wondering how to sync a Roku remote.

    In addition to the pairing button, there are other ways to pair a Roku remote with your TV. You can link your Roku remote to your smartphone or manually connect to your Roku device by pressing the remotes buttons on your TV.

    Before we get into further detail, lets look at a brief overview of Roku.

    Established In

    Read Also: How To Program Fire TV Remote

    Two Types Of Roku Remotes

    There are two types of Roku remote controls: the simple remote, which uses infrared light and needs to be pointed directly at a receiver to work, and the voice remote, which uses WiFi and doesnt require a direct line of sight. You can tell them apart because only one has a voice button.

    If you dont see a button with a microphone or magnifying glass icon on your remote, it means you have the older simple remote.

    How Do I Hard Reset My Roku

    If after following the instructions for resetting your device, your Roku is still not pairing, you can do a hard reset otherwise known as a factory reset.

    To do this, press the home button. Browse the scroll down menu and select settings then advanced system settings. Click factory reset. A screen will pop-up with instructions and then the reset should start in a few moments.

    You May Like: How Do I Get Facebook On My TV

    How Do I Pair My Rca Universal Remote To My Roku

    One way is to use the Roku mobile app. Another way is to use the Roku remote control.

    To use the Roku mobile app:

    1.Open the Roku mobile app.

    2.Tap on the Remote tab.

    3.Tap on the Add Remote button.

    4.Tap on the Add Device button.

    5.Select your Roku device from the list.

    6.Tap on the Continue button.

    7.Enter the PIN that is displayed on your Roku device.

    8.Tap on the Add Remote button.

    To use the Roku remote control:

    1.Press the Home button on your Roku remote control.

    2.Select the Settings option.

    3.Select the Remote Control option.

    4.Select the Add Remote option.

    5.Enter the PIN that is displayed on your Roku device.

    6.Select the Done button.

    How To Reset An Unresponsive Roku Voice Remote

    There Is No Pairing Button On My Roku Remote / This roku remote ...

    To reset an unresponsive Roku remote, unplug your Roku device from power and remove the batteries from your remote. Then plug your Roku device back in and wait until you see the Roku logo on your screen before reinserting the batteries. Finally, press the pairing button on your remote to pair it.

  • Unplug your Roku player from power.
  • Then remove the batteries from your remote.
  • Plug your Roku player back in after 5 seconds.
  • Once you see the Roku logo on your screen, reinsert the batteries in your remote.
  • Then press and hold the pairing button on your remote. Do this for about 5 seconds, or until the pairing light starts flashing on the remote.
  • Wait for the Roku to complete the pairing process. This will take 30 seconds, sometimes less. You will see a prompt on your TV when the remote has been successfully paired.
  • Recommended Reading: How To Get Peacock TV On Samsung TV

    Pair Your Roku Remote

    When trying to substitute the Roku app for a remote, keep in mind that your smartphone and the streaming device are connected to the same Wi-Fi network otherwise, it will not work.

    You can also try to Sync your Roku Remote Without the Pairing Button, if you cant find a Pairing Button on your Roku Remote.

    Also, make sure that neither your phone nor the Roku box are connected to a VPN if this is the case, it will not work.

    If you have an IR remote while checking for obstructions between the Roku remote and the device, ensure that there arent any dust particles blocking the receiver on either end of the remote control or the device.

    Be sure to perform a factory reset if you are planning on returning it or selling it to someone else.

    Now, if all else fails, you can contact customer service, and they should be able to provide you with suitable solutions.

    How To Sync An Enhanced Roku Remote Without Pairing Button

    Now that we know only voice remotes can be paired to work with Roku, lets look at ways to sync it without using the pairing button.

    There are three ways to do this:

    • Use the Roku app. This is useful if you bought a replacement for your lost or broken remote and cannot access on-screen Settings.
    • Power cycling your Roku Device. If your Roku remote pairing button is not working, this may be the move.
    • Use your TVs physical buttons to pair your remote. This should be your last resort.

    You May Like: How To Turn On Smart TV Without Remote

    Things You Should Know

    • Turn on your TV and your Roku. Use the Roku mobile app to navigate the menus and help you sync the new remote if you don’t have access to your old one.
    • Go to Home> Settings> Remotes & devices> Set up a new device> Remote.
    • Be sure your replacement remote has batteries. Then, pair it by pointing it at your Roku or by pressing and holding the pairing button for 5 seconds.

    How To Pair And Sync Your Remote With Roku

    How to Pair a Roku TV Remote Without a Pairing Button

    Remotes are indispensable to the Roku experience sure, you can also use Google Cast or the official Roku app, but a dedicated controller is usually simpler and faster. Heres how to pair Roku remotes, whether as replacements or upgrades.

    Read more: The Roku buyers guide


    To pair an enhanced Roku voice remote, unplug your Roku device, wait five seconds, then plug it back in. Remove the remote’s battery cover, and within the first 30 seconds after the homescreen appears, hold the pairing button until a status light flashes. Roku’s simple” IR remotes don’t need to be paired, but won’t work with products missing an IR receiver, like Streaming Sticks.


    Don’t Miss: Can You Get Espn On Apple TV

    Sync The Remote Using The Pair Remote Option

    This option only works if your TV allows you to navigate through the settings without using a remote.

    Here are the steps you need to follow:

  • Go to theHomescreen of your Roku device.
  • Scroll down until you find Settings.
  • In the Settings menu, you can find the Remotes option on the left side.
  • Now, select the Pair Remote option.
  • This feature should automatically pair your remote with your Roku device.
  • If the remote does not pair automatically, it might mean theres a problem with your remote. In that case, you can try to troubleshoot your remote or restart your Roku device.

    What Are The Compatible Remotes For Your Roku Device

    Most of the confusion regarding the Roku remote pairing process stems from the lack of clear information from Rokus side regarding remote compatibility for various Roku models, present and old. To find the model of your Roku streaming player, follow the steps below:

  • Navigate to Home by pressing the button or by using the app
  • Select Settings
  • The name of your Roku device and the model number should be visible there.
  • Here is a compatibility table we created to help you.

    Roku Device
    Roku Smart Soundbar Simple, Voice, Voice Pro

    Note: While Simple Remotes work with Roku TVs and Roku players, ensure that the specific IR remote you are purchasing is compatible with Roku TV and/or Roku player. This is because sometimes they are mutually exclusive.

    Read Also: How To Watch Regular TV On Lg Smart TV

    Pairing A Voice Remote With Regular Batteries

    If your Roku voice remote uses standard batteries, to get it paired, first, remove the back cover and take out the batteries. Also, unplug the power cable behind your streaming box, wait five seconds, and then reconnect it. Once the Roku home screen appears on your TV, put the batteries back in your remote.

    Now, with the back cover of the remote still removed, press and hold the pairing button to the right of the green status light on the back of the remote and wait for it to begin flashing. Follow the pairing dialogue that will appear on your TV screen after about 30 seconds.

    How To Add A New Or Second Remote

    Where Is The Pairing Button On My Roku Express Remote

    You can add a new remote or add a second remote to control the same Roku TV or player. This is convenient if you have gaming remotes as it will accommodate two-person gameplay on compatible games.

  • In the Home Menu,scroll down to Settings on the category menu on the left side of the screen.

  • Select Remotes & Devices.

  • Choose Set up a new device.

  • The next page will provide you with the instructions you need to pair your new remote.

  • If the pairing doesn’t take on the first attempt, repeat the steps.

  • Don’t Miss: How Do I Know If My TV Has Chromecast

    How To Pair A Roku Remote To Your Streaming Device

    Before we get started pairing the remote, you’ll first need to set up your Roku device by connecting it to the TV. That’s a relatively simple process by itself, and you can learn how to do so by reading our guide on how to connect a Roku streaming device to your TV.

    If your Roku device has been connected successfully, upon first use, you’ll see the Roku logo splash screen followed by a language selection menu. This will be the first menu in which you’ll need to make a selection before you can gain full access to Roku OS. But in order to do so, you’ll want to know how to pair the Roku remote so you can begin interacting with the menu.

    As shown in the above image, when you access Roku OS for the first time, you’ll be prompted to pair your Roku remote. First, remove the casing on the back of the remote, and ensure you’ve inserted the two AAA batteries required to power the remote. You’ll get a pair included in the box of a brand new Roku streaming device.

    With that, we’re almost at the end of the process of pairing your Roku remote. We don’t want to put the protective casing back on the remote just yet, though. Once you’ve slotted the AAA batteries into place, you should see a blinking green light just below where you’ve placed the batteries. If this happens, check your TV screen, and if the “pairing remote” status has appeared, wait roughly five to ten seconds for the process to complete.

    S To Connect Roku Infrared Remote

    First, connect the Roku streaming device and power source together to pair the Infrared remote. Click any of the buttons on the remote after inserting new batteries. The process for pairing beginsautomatically when your remote is near the device.

  • The Roku device needs to be plugged into the circuit for power and the TV.
  • You must then change the TV to HDMI input in order for Roku to operate.
  • The television or its original remote has a Source button. Press it to do so.
  • The Roku remotes batteries need to be inserted.
  • To operate the remote, press any of the buttons. Your remote will be automatically paired to your Roku streaming device after doing this.
  • Make sure the Roku device is in your sight when youre using the IR version of the Remote.
  • Read Also: How To Cast Crunchyroll To TV

    How To Pair The Roku Enhanced Remote

    If you own an enhanced remote, pairing it to the Roku player is extremely simple. You dont even need to be in the direct line of sight of the device when youre using the remote. In short, all you have to do is put batteries in your remote and let the on-screen prompts guide you. Follow the instructions outlined below to know exactly what to do.

  • Start by setting up the Roku device if it isnt set up already. Plug it into a power outlet and connect it to your television.
  • Place a set of fresh batteries in the Roku remote and close the battery compartment. If youre missing new batteries, just remove the old ones and use them again.
  • Put the Roku remote next to the Roku player. The devices will start to pair.
  • Follow the screen for clues. Once the pairing process is over, the screen will let you know.
  • More articles

    - Advertisement -

    Popular Articles

    - Advertisement -