Will Best Buy Mount My TV

Flaws But Not Dealbreakers

For all that we liked about the Sanus VMPL50A-B1, its not without its downsides. None of them, though, offset the mounts positives.

The low profile of the VMPL50A-B1 is one of this mounts primary benefits, but this also means you have limited room to run wiring behind it. Its true that tilting the TV forward opens things up a bit. But if you have a TV with rear-facing inputs, there is a chance that you will have to remove the TV from the wall if you need to change any wiring.

We also found that, once installed, the Sanuss monitor brackets sat very close to the wall. So when we were removing the television, we had to be extra careful not to press the brackets back against the wall and mar it.

Upgrade Pick: Sanus Vlf728

Although most people will be satisfied with a standard tiling mount, a full-motion mount offers you the flexibility to pivot a TV left or right to improve viewing from different angles. Of the full-motion mounts we researched and tested, the Sanus VLF728-B2 had the best combination of a low profile, a long extension, a wide pivot, and excellent placement flexibility. This UL-approved mount is designed for TVs from 42 to 90 inches and that weigh up to 125 pounds. Its compatible with 15 VESA patterns. The arms are capable of a massive, 28-inch extension, but when you press the mount back against the wall, it has a profile of only 2 inches or so. The movement of the mount is smooth, and the adjustments, like the post-level install and the lock on the TV tilt, are intuitively placed and easy to use. Setup is a little more fiddly than with the other full-motion mount we tested, but thats a minor point considering the VLF728-B2s wide movement capabilities.

In our tests, the VLF728-B2s motion was very smooth. The arms had only minimal flex, and they moved around with very little effort. Others we tested were stickier and had an uneven resistance as we moved the arms.

If the Sanus VLF728-B2 has a flaw, its that there are more stylish mounts available. The Peerless SUA771PU, for one, is very attractive and has an almost artistic feel, but it does not have the extension or the placement capabilities of the VLF728-B2.

Also Great: Echogear Eglf2

If the full-motion Sanus VLF728-B2 is not in the budget, or you dont need its extreme capabilities, the EchoGear EGLF2 is a nice, inexpensive alternative. It has none of the finesse, capabilities, or polish of the VLF728-B2, but considering the vast cost difference, this is not surprising. Still, compared with the other full-motion mounts in its price range, the EGLF2 is UL-approved, offers smooth action on the arm, and gives at least some attention to aesthetics. It also holds the back of a TV less than 2½ inches off the wall, closer than most mounts in its price range are capable of. The EGLF2 is compatible with TVs sized between 42 and 86 inches and weighing up to 125 pounds, and it supports nine VESA patterns.

The EchoGear EGLF2 can extend a TV 22 inches from the wall. Although thats 6 inches less than the Sanus VLF728-B2 can stretch, its more than what you can get from most $100 full-motion mounts, which top out at around 20 inches. The movement of the arms is smooth, in contrast with the stiff arms of the similarly priced Mounting Dream MD2298, which we also tested.

The EGLF2 also has a tilt feature and post-level adjustment. As with the VLF728-B2, both adjustments are easy to reach and fairly simple to use.

Recommended Reading: Can I Get Local Channels With Apple TV

How To Choose The Best TV Mount For You

Picking the best TV mount starts with your TV: how big is it and how heavy is it? You want to make sure the TV mount will work with its size and be able to handle the weight. Next, youll need to check that the TV mount you choose will attach to your TV properly. Most TVs these days are VESA compatible, meaning the mounting holes on the back of the TV are a standard distance from each other. VESA patterns differ based on the TV size itself, but generally are listed as 200 x 200 millimeters, 400 x 400 millimeters and so on.

With several styles of TV mounts to choose from, your next choice is whether you want one thats fixed tilts or uses an articulated arm . Fixed mounts tend to have the lowest profile, meaning the TV will be closest to the wall. This can make it challenging to get to ports unless the TV mount has a way to release the TV from the mount for access. Tilting TV mounts can be great for angling a TV for better viewing. Articulated TV mounts give you a lot of flexibility, with arms that both extend and swivel, allowing you to position the TV for the best viewing angle.

Once you’ve bought a mount for your TV, you might need some help hanging it on the wall. Check out How to mount a TV to the wall in 8 easy steps for our hassle-free advice.

Things To Consider Before Mounting Your Samsung TV On The Wall

Getting your TV up on the wall gives you more space, a better view, and keeps it out of reach of children and pets. But before you begin, you may be wondering: where is the best place to mount the TV, how high should I mount my TV, what types of mounts work with my TV, what size screws or bolts do I need, can I buy replacement screws, and finally, how do I mount my TV? Find the answer to all of the above and more. You can visit Samsung accessories page to purchase wall-mounts or Samsung Parts to purchase replacement screws.

Also Check: How To Change Input On Sanyo TV Without Remote

Why You Should Trust Us

Ive been reviewing home and outdoor gear since 2007. I spent 10 years in construction as a carpenter, foreman, and site supervisor, working on multimillion-dollar residential renovations in the Boston area, and my deep understanding of fasteners, materials, and styles of wall construction helped me evaluate the wall mounts.

In writing this guide, I consulted with Grant Clauser, Wirecutters senior editor of audio/video and smart-home coverage. Grant has THX Level II home theater design training and has been writing about and reviewing home theater equipment since 2000.

Picking A Type Of Mount

As discussed above, three types of TV wall mounts exist: fixed, tilt, and tilt/swivel. Look closely at the room where youre going to hang the mount. Will you need the mount to tilt and/or swivel? Think about how the seating is arranged in the room to determine whether you need some versatility in the TVs angle.

Don’t Miss: How To Adjust Screen Size On Sanyo TV Without Remote

Echogear Full Motion TV Wall Mount Eglf2

Full-featured, full-motion TV mount

Reasons to avoid

Finding the perfect spot for a large TV can be hard. Thats where a dual-arm articulated mount comes into play, and the Echogear Full Motion TV Wall Mount EGLF2 has the flexibility you want in this type of mount. It works with TVs from 42 inches all the way up to 90 inches, and can support up to 125 pounds good enough for almost all current TVs. Best of all it extends 22 inches from the wall, can move 130 degrees and tilts 15 degrees, allowing you to get the best viewing angle from a lot of different seating locations.

You can install the EGLF2 on studs that are either 16 or 24 inches apart and it includes important post-installation levelling for minor adjustments. The EGLF2 works with VESA patterns from 200 x 100 to 600 x 400 millimeters. The only potential drawback is that, when collapsed, the unit is 2.4 inches from the wall.

Using The Bubble Level

Do not skip the step of ensuring that the mount is level before hanging the TV.

Use your bubble level to measure the mount both horizontally and vertically, ensuring its straight. If it isnt, take down the mount and start over with the installation process.

A crooked TV mount will leave the televisions weight off-centre, which could cause the mount to eventually fail.

“If you cannot use a wall mount at your home for whatever reason, bear in mind that manufacturers do make ceiling mounts that can fit a wide variety of TV sizes.”

Don’t Miss: How To Stream Oculus Quest To TV

Best Buy Customers Often Prefer The Following Products When Searching For TV Wall Mount Brackets

Browse the top-ranked list of TV Wall Mount Brackets below along with associated reviews and opinions.

Browse the top-ranked list of TV Wall Mount Brackets below along with associated reviews and opinions.

Size Weight And Flexibility

When looking at wall mounts online, they will most likely be rated by the screen size of the TV they support and the weight they can hold, the latter of which is the most important factor. Different brands vary in weight even if the sizes of TVs are the same. If you are looking at a TV wall mount online, check the product description to see more information about the maximum weight and screen size it can handle. You can also find this info on the wall mounts box.

The next thing to consider is the flexibility you want your TV to have while mounted. If you want to be able to see your TV from other rooms, a good option is a pivoting wall mount. This will let you change the direction the TV is facing to optimize the picture on the screen, even if you arent sitting right in front of the TV. If you are mounting your TV above the average eye level , youll want to invest in a TV wall mount that tilts down to improve picture quality. Fortunately, most mounts can tilt and pivot.

If the TV can be positioned at the ideal height and you dont need to access the TV ports on a regular basis, a fixed mount will simplify the installation and the TV will be close to the wall, taking up less space. Consider a slim mount if this is the case for a more elegant overall appearance. Many tout how close they can hang to the wall.

You May Like: Where To Watch George Lopez TV Show

Buying A TV Wall Mount Read This First

Mounting a TV is a great way to free up space in your living room. If youve got kids who get touchy with electronics that they shouldnt be putting their hands on, an out-of-reach TV will keep gooey prints off your new OLED screen. In terms of visual charm, mounting a TV is a staple of modern home decor. Its aesthetically pleasing, especially with TVs getting thinner every year. Plus, they can go anywhere from a flat wall to a corner, and even above a fireplace .

If youre on the fence about mounting your new set, where it should go, and what mount you need, weve put together this guide on what to consider about your home before mounting, and what hardware you should be on the lookout for to get the job done right.

Best Buy Customers Often Prefer The Following Products When Searching For Corner TV Mount

Browse the top-ranked list of Corner TV Mount below along with associated reviews and opinions.

Browse the top-ranked list of Corner TV Mount below along with associated reviews and opinions.

Also Check: How Do I Get Espn Plus On My Smart TV

What To Look Forward To

Sanuss new $160 VLT7 looks to be a step up from the VLT6 listed in Other TV wall mounts we like. The VLT7 allows for tilting in all four directions and can extend 6.78 inches from the wall to support the full tilting range for larger screens. It is compatible with TVs from 42 to 90 inches and has a depth of 2.1 inches. We plan to check out this new model soon.

Our Pick: Sanus Vmpl50a

After all of our research and testing, we selected the Sanus VMPL50A-B1 as the best tilting TV mount. This UL-approved mount is designed for TVs ranging in size from 32 to 70 inches, and it can hold up to 130 pounds, which is more than enough for any TV.1 This Sanus model has one of the thinnest profiles of the tested mounts, holding the back of the TV about 1¾ inches off the wall. Yet, when tilted, it still gives you room to get a hand behind the TV for wiring purposes. In our tests, installation was quick and easy, and we found that the mount was fully adjustable once we had the TV in place, both side to side and, with two bolts, to correct the level. The VMPL50A-B1 is compatible with 22 VESA patterns and comes with 10 bolt sizes, the largest selection of any mount we tested.

The VMPL50A-B1 can tilt 9 degrees forward and 10 degrees backward. This range was similar to what we saw from the other tested tilt mounts, most of which could tilt forward and backward anywhere from 7 to 10 degrees. Depending on the size of the TV, this range can give you an extra couple of inches to squeeze your hand in to plug in a new component. Some mounts offer a little more tilt than the VMPL50A-B1, but a degree or two doesnt make a huge usability difference. One thing we particularly like is that the VMPL50A-B1 has a nice range of tilt both up and down , and you can adjust it with just one hand on the TV.

Recommended Reading: Philips Smart TV App Store

Best Buy Customers Often Prefer The Following Products When Searching For 65 TV Mount

Browse the top-ranked list of “65”” TV Mount” below along with associated reviews and opinions.

Browse the top-ranked list of “65”” TV Mount” below along with associated reviews and opinions.

How High To Mount The TV

Height may be the most important thing to consider when you mount your TV. First, think about the room itself. Is the TV going in your living room, a home bar, or a game room? If you are going to be watching from bar stools, then it needs to be mounted high enough for comfortable viewing from that height. But if you’ll be standing around a pool table and watching TV, you’ll want to mount it even higher since you will watch it primarily while standing up. You may also want the option to angle it down, if you decide to sit.

If you are mounting your TV in a living room, it’s a good idea to sit in your favorite spot and have a friend measure the distance from the floor to your eye level. If that’s too much trouble, you can mount your TV 42 inches from the floor to the center of the TV. This should meet the approximate eye level of someone who is 5 feet 6 inches tall sitting on a standard couch.

Note: Make sure you don’t forget the piece of furniture you may be placing under your TV. Depending on the size of your TV, 42 inches may not allow enough space for the table or cabinet. If not, mount the TV about 4 to 6 inches above the furniture.

Recommended Reading: How To Change Input On Sanyo TV Without Remote