TV Wall Mount: How To Hide Cables In A Stud Wall
Most modern homes now use plasterboard sheets to construct internal walls that are attached to a timber frame, otherwise known as stud partitioning. This construction technique leaves a space in-between, which is sometimes filled with insulation to keep the room energy efficient. When wall mounting a TV, you can use this gap to hide your cables within.
Wrangle Your Cords With Cable Ties
Velcro cable ties are cheap and easy to remove.
Of all of the solutions here, the cheapest and easiest way to tidy your system is to use cable ties. They allow you to create order from the chaos that’s behind there, and it’s easy to go back and change if you add new components. There’s a couple of options as far as the ties you can use. Forget the one-use plastic ones, though: Go for reusable velcro bands or wire ties.
When running cables together, try to keep AV interconnects and electrical cables separate. This prevents electrical current interfering with analog signals in particular, such as those which travel along speaker wires. Use the ties to fix the cables along the natural boundaries of AV furniture and walls.
Use Zip Ties To Clean Up Wire Clutter
Use zip ties to tuck cables neatly and discreetly into a corner of the room or under furniture.
The most common technique is wrapping zip ties around the cables and securing them to a larger main cable near the floor like your tv coaxial cable. This way the cable will stay flat against the wall, and you wont have any loose cables sticking out or hanging off furniture.
Read Also: Tudn Sling TV
How To Create A Charging Station
A well located charging station is essential if you have a number of electrical devices in your home. It is easy to build one that hides the wires and cords from view.
- Pick a drawer or lower cabinet at your desk that is near an outlet.
- Use a drill with a hole saw bit to drill a hole in the back of the drawer or cabinet. Insert a desk grommet through the hole.
- Feed the plug from the power strip through the grommet you just drilled in the back of the drawer or cabinet.
- Apply double-sided adhesive to the back of the power strip and stick it to the inside of the drawer or cabinet.
Conceal Your Power Strip
The power strip is the source of so many things, but cord clutter is often the main attraction of this show. Try lifting the strip off the ground to keep all those plugs out of sight. Most power strips have holes on the back so you can even hang them on the wall with just a few screws or nails. If your entertainment center has legs for days, installing the power strip just below the base bridges the gap between the furniture and the wall. Another option is a wall-mounted power strip that plugs right into the outlet.
You May Like: Insignia TV Chromecast
The Best Way To Hide TV Wires On The Wall
With more than 8,000 reviews and a 4.5-star rating, this cable-management kit is a number-one best-seller on Amazon. In short, it comes with everything you need to disguise your TV wires on almost any surface. The kit includes 10 PVC channels that are over a foot in length, multiple elbows and connectors so you can route your wires in different directions, and screws, anchors, and self-adhesive tape so you can install the kit your way. All exterior materials can be painted so they blend right in with your wall color, and reviewers say the whole thing is “easy to install” and “looks very professional” when finished.
One reviewer wrote: “We bought a wall mounted media console and choose these cable covers to make the area neater in appearance. They are white, but I painted mine to match the wall color. They were easy to cut to the size I needed and easy to install and pop in place. I chose the adhesive tape as opposed to screws.”
How To Hide TV Wires Behind Furniture
The owner of an apartment or house wants the wires to be as small as possible, more precisely, so that they are not visible. To quickly hide cables, you can buy special furniture, which already has technological holes for the antenna or cable wire.
Most often, such furniture includes TV stands. They are equipped with a hole where you can easily and quickly remove all wires. And discreetly plug them into a nearby outlet. In the same pedestals can be pull-out shelves for TV set-top boxes, DVD players, and other equipment.
Place the TV stand as close to the outlet as possible. If this is not possible, you can run the extension cord under the baseboard and bring the power source as close and unnoticed as possible.
Recommended Reading: How To Connect A Vizio TV To Your Phone
What Do I Do With The Space Under My Wall Mounted TV
The space beneath your wall mounted TV can be a useful area to add more storage. You can choose from a wall-mounted shelf that can keep your DVDs and Blu-rays looking neat.
You can also choose a TV stand or media unit that will keep all your media equipment and gadgets concealed. Alternatively, you can use the space below your wall-mounted TV to install a soundbar to enhance the sound quality on your TV.
How To Hide TV Wires On The Wall
So How to Hide TV Wires on The Wall?The most popular and easiest ways to hide TV wires on the wall is by decorating a wire, using external cable ducts, special ducts, or by using a special cable bracket. Any of these methods will help you to hide any wires that are coming from your TV and thus get a much clearer and more beautiful view.
Recommended Reading: How Do I Connect My Phone To My Lg TV
No : Repeat For The Bottom Plate
Next, cut out a hole for the bottom plate. Then insert your wires into the top plate and fish them out below. Pull all the wires out, then put them through the second cable plate and secure it to the wall.
Plug in every cable, and you should be good to go without any ugly wires in sight. This also works wonders for any kind of wire or cable, from your computers to your modems, so this skill could come in handy more than you might think.
Hide TV Cords Behind Other Objects
This one is a basic trick that you can implement in a few minutes, and costs nothing. It works best if you have a surface under the TV, and the distance is not too large between the two items.
Place some home decoration items, picture frames, plants or books under the TV and position them so that they cover the cords. Make sure you dont just put the items randomly below the TV. They should look natural and blend in the environment. Thats all.
Hiding TV wires not only makes a room look better but also makes it much safer. However, theres so much more you can do to make your home a safer place. Weve collected the most important easy-to-implement home safety measures you should know in this article.
Weve also created a useful home safety checklist that you can download free at the end of this article.
SEE ALSO:
Don’t Miss: Oculus Quest 2 To Roku TV
Conceal TV Wires Behind Wall Trim
Its not the easiest and quickest way to hide your TV cords, but its certainly an eye-catching one. It can be a great solution when you want to hide TV wires over a fireplace.
Its major disadvantage is that the cables are not so easy to access under the trim work if you need to remove or add one in the future. Thats why I only recommend this method if youre willing to spend some time disassembling the trim work each time you add or remove a new device to your TV set .
So, the basic idea is to hide the cords in a channel formed by two slats and covered with a third one. Youll need to make both horizontal and vertical channels.
Before you start the execution, I suggest that you plan and design the trim work on paper, and test the length of the wires. You can paint the slats any color you like, but do that before mounting them on the wall . For more detailed instructions, visit this website.
Use Cord Clips To Hide Your Wires Behind A TV Stand
If your TV is sitting on some kind of stand, you can easily hide your wires by using cord clips. These small plastic clips usually have an adhesive backing, so you can stick them to the back of your furniture without worrying about damaging anything.
All you need to do is place these cord clips around the back of your furniture and snake your wires around to your surge protector or other devices. This will also help you keep your cords organized and stop them from getting tangled up.
If your TV stand has open space at the bottom, you can use zip ties to keep your wires from touching the ground. All you have to do is spool your wires and cinch them together with a zip tie in the middle. However, make sure there is enough slack so you can pull your TV stand out and access your wires.
If you dont want to cut your zip ties every time you need to move a wire, you can also use Velcro zip ties. And, if you want to save even more space, you can use a flat outlet extender that lets you plug your cables in from the side. This can also double or triple the number of outlets you can plug your devices into.
If you cant use cord clips or zip ties to hide your wires, you can always use a cable management box. These small plastic boxes are large enough to hide your wires and even a small surge protector.
Read Also: Can Oculus Quest Cast To Firestick
Choose A TV Unit With Cable Outlets
Invest in a decent media unit with cable storage to hide TV cords away. You can buy a range of off-the-shelf TV units online, and many TV stand ideas include clever ways to hide cords, too.
We particularly like the look of the simple, clean lines of the Ikea Besta TV Storage Combination. The TV stand includes room for displaying your TV and media kit such as your DVDs and Blu-rays, Sky Box etc – behind the glass doors.
Its most enticing design feature is the cable outlets at the back of the TV bench. This lets you easily tame the wires so they are neatly hidden within the unit.
Hide Your TV Wires Seriously Those Cords Are Out Of Control
OK, enough with the tangle of TV wires. It’s finally time to wrangle them into submission, and we have some clever ideas to share.
Can’t concentrate on your latest Netflix binge-watch because of the secret shame of tangled cables creeping out from behind your TV? You’re not alone. Most people have a jungle of unruly cords taking over their living rooms. But it doesn’t have to be this way: Start 2022 on the right foot by getting those TV wires in order and hiding them so you can actually relax during TV time.
Tidying up the cables behind your home theater system makes it not only more attractive to look at, but also easier to use and maintain. I’ve written about the other ways you can improve your setup here, but tidying cables can have one of the biggest impacts. You don’t need to be an IT engineer to make your cables neater, and neither do you need a big budget. All you need is a little time and a couple of inexpensive items. If you want to give your TV that showroom finish you’ve been craving here are five simple tips.
You May Like: Does Lg Smart TV Have Airplay
Hide Your TV Wires Behind A Panelboard
If youre feeling crafty, you can put up a panel to hide the wires hanging from your TV. Panelboards come in many sizes and designs. You can pick one up with a flashy pattern, or you can also choose something simple.
Cant find a pattern that you like? No problem! Cover the panel or board with fabric, and youre good to go. You can also paint it to match your wall or choose a design that will make your TV stand out. If you dont want to spend money on a panel and fabric, you can use wood pallets to hide the wires. You can paint the pallet board or leave it natural for a farmhouse or rustic design.
Use A Cable Hiding Kit
The simplest, easiest, and often the most inexpensive method is to use an external or on-wall cable hiding kit or cord concealer. Cord concealers can be found at online vendors starting for as little as $18 and work simply by holding all your cables or wires in a long half-cylinder that thats height-adjustable or easily cut to size, and is usually easily paintable or come in an off-white or white color that will go with most walls.
Related:
Read Also: How To Download Philo On Smart TV
Products To Organize All Of Your Messy Cords
For someone who deals with tech all day, I was unreasonably excited to buy myself a clamp-on power strip for my desktop. The main thing it did, and which it can do for your TV unit too, is to lift the connections off the ground and tuck them neatly out of sight. The Tripp Lite model I chose only has six outlets, but you’ll probably need more than that. For example, my TV system uses two eight-outlet power strips.
If you want a larger selection of outlets you can either opt for a clamp that will attach to your existing strip, or you can go the whole hog and grab a component-level power conditioner.
Buy Trunking For TV Cables
Using square plastic trunking to hide cords is an easy way to tidy cables as they can be easily fed through the trunking and down to the plug socket. You can buy trunking online at places such as Screwfix and B& Q or from your local DIY store. You can then use silicone sealant and self-adhesive pads to fix the trunking to the wall simply – this can be useful to incorporate into your bedroom TV ideas.
White plastic trunking should be reserved for areas you cant see, like cupboards, says Owen Maddock, home technology specialist at Cinemaworks. However, D-line trunking comes in half-round and quarter-round shapes and looks much neater. You can also paint D-line to match the walls.
Alternatively, galvanised steel can give you that industrial interior design look. But HDMI plugs are usually too thick to pull through, so source some half-round instead and use that to cover over the cables.
Read Also: How To Connect An Oculus Quest To A TV
How To Hide TV Wires Without Cutting Wall
The main reason as to why one would want to hide TV cords in living is for safety measures. TV wires, when left out, pose a potential danger for young ones if accessible. Another reason is to make the living room look neat. There are various ingenious hacks to hide the stray and messy cables without cutting the wall. Especially to those renting where screwing holes on walls is forbidden. Do not worry here are creative methods that can help.
Contents
Hide TV Wires In Wall Kit
Cut The Entry And Exit Holes
Once the entry and exit have been marked, grab your wire detector and triple check theres nothing behind there. Then youre free to cut the hole using the flat wood cutting bit on your multi-tool.
Top tip: If you dont have a multi-tool, you can drill a hole in all four corners and use a plasterboard knife to cut out the squares.
- Find the best drill for the job.
Recommended Reading: How To Cast Quest 2 To Roku TV
Buy Cover Cables And Cut Them Accordingly
Buy Cover Cables and Cut Them Accordingly
Cable covers are flat plastic stripes that are used to attach the wall using double-sided adhesive. First, remove the material protecting the cord cover. Measure out lengths required. Mark a symbol at the needed length and carefully cut using a pair of scissors or a handheld saw. Make sure you have enough cords to avoid unsightly gaps.
Organize Cords With Cable Clips
Image courtesy of Walmart
A really simple and non-invasive way to hide cables is to run them along the back of your entertainment center. Its super-easy to do with the help of these self-adhesive cable clips, which you can run along the back of a TV stand or other furniture to keep your cables quietly tucked away for all eternity.
Don’t Miss: How To Connect Your Oculus To Your TV
Hide TV Wires Behind The Wall
If cutting into your walls is an option, it is the best method to hide your TV wires. Not only will your cables be out of sight, but if you use an in-wall power extender with more than one outlet, you can plug more devices into the back of your TV.
Plus, this method also lets you mount your TV flush against the wall. This is because most power extender kits are recessed, so your cables wont hit the back of your TV when you retract it back.